Metallics JPMP76 10-32 x 1-3/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.59
$0.59
Metallics JPMP76 10-32 x 1-3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP76 10-32 x 1-3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP76
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.59
$0.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1-3/4 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • 10-32 Diameter, 1-3/4" Length
    • Pan head with Phillips Drive
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Color:
Silver
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1/3/04
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.38 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP76 – Frequently Asked Questions

1) What size Phillips bit do I need for these 10-32 pan head screws?
A #2 Phillips. The recess is sized at 0.192 inch diameter with a gaging depth of 0.089 to 0.113 inch, so a #2 driver seats fully. A #1 will cam out and a #3 will not bottom in the recess.
2) How much clearance does the pan head take up above the surface?
The pan head on the JPMP76 runs 0.122 to 0.133 inch high and 0.357 to 0.373 inch across. That slightly domed, broad-bearing head sits proud of the surface rather than flush, so if you need the fastener to disappear into a countersunk hole you want a flat head instead of a pan head.
3) Are these machine screws made to a recognized dimensional standard?
Yes. The JPMP76 is manufactured to ASME B18.6.3-2010, the standard for machine screws, with steel conforming to AISI 1006 through 1022. That means head and thread dimensions interchange with any other screw built to the same spec, which matters when you are matching an existing fastener on a panel or enclosure.
4) How strong are these screws, and can I torque them down hard?
Tensile strength is 60,000 psi minimum with a hardness of Rockwell B70 to B100, which is typical low-carbon steel machine screw strength. Fine for mounting devices, covers, straps and panel hardware. For structural or high-torque clamping loads you want a graded cap screw or bolt instead, not a machine screw.
5) Is a zinc plated steel screw okay for outdoor or damp locations?
The JPMP76 is zinc plated steel with a silver finish. Zinc plating handles indoor and dry commercial use well, but it is a sacrificial coating, not stainless. For wet locations, coastal exposure, or anywhere corrosion would seize the fastener in place, specify a stainless machine screw in the same 10-32 x 1-3/4 size.
6) Do these screws qualify for Buy American or ARRA funded projects?
The JPMP76 is flagged as both Buy American compliant and ARRA compliant in the manufacturer data, with country of origin listed as multiple. That is the compliance detail institutional and government procurement needs on the submittal, so capture it with the part number JPMP76 on your paperwork.
7) What is the difference between a machine screw like this and a self-tapping sheet metal screw?
A machine screw has a uniform, blunt-ended 10-32 machine thread meant to engage a pre-tapped hole or a nut. It will not cut its own thread in sheet steel. If you are fastening into a plain punched hole in enclosure sheet metal with no tapped thread, you need a self-tapping or thread-cutting screw, or you tap the hole 10-32 first and then use the JPMP76.
8) How are the Metallics 10-32 x 1-3/4 machine screws packaged, and what is the minimum order?
They ship in a jar of 100 pieces, and 100 count is the order minimum. Jar weight is listed at 1.38 lbs. The jar is the practical shop or truck-stock pack for a screw you reach for repeatedly.
How fast can I get the Metallics JPMP76 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP76 come with a warranty?
Absolutely. The Metallics JPMP76 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP76?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP76 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!