Metallics JFMP93SS 10-32 x 2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFMP93SS 10-32 x 2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JFMP93SS 10-32 x 2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFMP93SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • 18-8 Stainless Material
    • Flat head with Phillips Drive
    • 10-32 Diameter, 2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.098 - 0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.333 - 0.362 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Gaging Diameter:
0.313
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.198
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.34 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.025 - 0.042 Above
Sub Division:
Electrical-E H2
Tensile Strength:
1200 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFMP93SS – Frequently Asked Questions

1) Will a 10-32 machine screw thread into my existing device yoke or box tapped holes?
The Metallics JFMP93SS is a 10-32 UNF thread, 32 threads per inch, cut to ANSI/ASME B1.1. That is the standard tapped size on receptacle and switch yokes and on most box mounting ears, so it mates with 10-32 tapped holes directly. At 2 inches long it is a deep-set screw, intended for boxes recessed behind thick plaster, tile or panel build-up rather than flush mounting.
2) Do these screws meet a dimensional spec I can put on a submittal?
Head and thread geometry follow ASME B18.6.3-1998 for the flat head machine screw dimensions, and the thread conforms to ANSI/ASME B1.1. Material standard is SAE. Note for public work: the JFMP93SS is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple.
3) Is 2 inches too long for a standard device box mounting?
For a flush box with a standard plaster ring, yes, it is longer than you need, and the excess thread will bottom out or stand proud behind the yoke. The 2 inch length earns its place where the device sits well forward of the box: thick tile, stacked mud rings, deep panel or millwork build-up. For ordinary flush mounting, a shorter 10-32 flat head from the same FM and FMP series is the right call.
4) Will the flat head sit flush in a countersunk hole?
Yes, that is what the flat head is for. The head measures 0.333 to 0.362 in. across and 0.098 to 0.116 in. high, so it seats into an 82 degree countersink and finishes level with the surface. If you need the head to bear on top of an unprepared flat surface instead, use a pan or round head screw, not this one.
5) What size Phillips driver do I need for these screws?
A #2 Phillips. The recess is 0.198 in. in diameter and 0.124 in. deep, which is the standard #2 geometry. A #1 bit will cam out and chew the recess, a #3 will not seat.
6) Are these screws suitable for damp, washdown or refrigeration environments?
Yes. The screws are 18-8 stainless, which is specified for general atmospheric corrosion resistance and is used in food processing machinery and refrigeration equipment. 18-8 also holds its strength better than plain steel as operating temperature rises, so it suits mechanical rooms and equipment enclosures as well as damp exterior-adjacent work.
7) How many Metallics JFMP93SS screws come in a pack?
They ship 100 to a jar, and the jar is the minimum order quantity. Plan the count per jar if you are pulling material for a multi-unit rough-in.
8) What trades use these Metallics flat head machine screws?
They are stocked for the electrical, plumbing, and heating and air conditioning trades. Typical use is fastening devices, plates, brackets and equipment panels where a countersunk head and corrosion resistant stainless are both wanted.
How fast can I get the Metallics JFMP93SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP93SS come with a warranty?
Absolutely. The Metallics JFMP93SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP93SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP93SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!