Metallics JFWP32 10 x 2 in. Fl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.34
$0.34
Metallics JFWP32 10 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP32 10 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP32
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.34
$0.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Phillips Drive
    • 10 Diameter, 2" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.123 - 0.146
Phillips Recess Diameter:
0.245 - 0.258
Phillips Recess Width:
0.034
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.12 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP32 – Frequently Asked Questions

1) What driver bit do I need for the Metallics JFWP32 #10 x 2 in. flat head Phillips wood screw?
A #3 Phillips bit. The recess on the JFWP32 runs 0.245 to 0.258 inch in diameter and 0.123 to 0.146 inch deep, so a #2 bit will sit shallow in it and cam out under torque. Stock #3 bits on the cart if your crew is carrying #2s.
2) Will a #10 x 2 in. flat head wood screw sit flush in a countersunk hole?
Yes, if the hole is countersunk. The JFWP32 has a flat head measuring 0.34 to 0.385 inch across with a 0.116 inch head height, so it is made to seat below the surface in a matching countersink. Drilled into a plain pilot hole with no countersink, the head will stand proud and crush the wood fibers around it.
3) Are Metallics JFWP32 screws Buy American or ARRA compliant for a government job?
No. The JFWP32 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your federal, state, or institutional contract carries a domestic sourcing clause, this screw will not satisfy it and you need a domestically produced fastener.
4) Can I use zinc plated wood screws outdoors or in a damp location?
Zinc plated steel is a dry-location finish. The JFWP32 is steel with a zinc plating, which handles interior framing, device mounting, and backboard work fine, but it is not a marine or sustained-wet material. For exterior decks, treated lumber, or wash-down areas, go to a stainless or hot dip galvanized wood screw instead.
5) Does the Metallics JFWP32 wood screw meet a recognized dimensional standard?
It is built to ASME B18.6.1, with threads to ASME B18.6.1-1997. That matters on spec jobs where the submittal calls for a standard-conforming wood screw rather than a proprietary deck or construction screw, because head, recess, and thread geometry are all held to the published dimensions.
6) How are these #10 x 2 in. wood screws packaged and what is the minimum order?
They ship in a jar, 100 screws minimum. So the unit you are buying is a 100 count jar rather than a single screw, which is the right buy for a truck stock or a shop bin. Jar weight is listed at 1.12 lbs.
7) Do I need to pre-drill for a #10 x 2 inch tapered point wood screw?
In hardwood or near an edge, yes. The JFWP32 has a tapered point and a traditional wood screw thread at 13 per inch, so it is not a self-drilling or auger-point screw and it will split dense or thin stock without a pilot hole. In soft framing lumber away from edges you can usually drive it dry.
How fast can I get the Metallics JFWP32 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP32 come with a warranty?
Absolutely. The Metallics JFWP32 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP32?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP32 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!