You may also like
1/2 90 DEG HT 316 SS LT FITTING
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- 90 Degree Fitting for Flexible Metallic Conduit
- Department:
- Electrical
- Product Subgroup:
- Electrical Fittings
- Product Color:
- Metallic
- Product Material:
- 316 Stainless Steel Body and Ground Cone
Thomas & Betts 5352SST6HT – Frequently Asked Questions
1) Is the 5352SST6HT fitting suitable for washdown, food plant, or coastal corrosive areas?
Yes. Both the body and the ground cone are 316 stainless steel, which is the grade specified for chloride exposure: coastal and marine installations, food and beverage processing with caustic washdown, wastewater, and chemical areas. Zinc die cast or plated steel liquidtight connectors will not hold up in those environments the way 316 will.
2) Does the Thomas & Betts 5352SST6HT provide a ground path, or do I need a separate bonding jumper?
The fitting includes a 316 stainless steel ground cone, which bites into the conduit armor to carry continuity through the connector body. Where your installation requires a bonding jumper or a grounding bushing by code or by spec, that is still a separate decision from the fitting itself.
3) Why would I use a 90 degree liquidtight connector instead of a straight one?
A 90 degree connector like the 5352SST6HT turns the conduit right at the enclosure, so you gain back the bending radius a straight fitting would need in front of the box. That matters where equipment sits tight to a wall, under a skid, or in a congested pipe rack. If you have room to sweep the conduit yourself, a straight connector is the cheaper and simpler termination.
4) What is the exact part number to order for the 1/2 inch 316 stainless 90 degree liquidtight fitting?
Order Thomas and Betts part number 5352SST6HT. That single MPN covers the 1/2 inch, 90 degree, high temperature, 316 stainless liquidtight connector; there are no finish or size options to pick on it.
5) Will this fitting look like the plated steel connectors already on my equipment?
Finish is bare metallic stainless, not painted or plated color. Against existing zinc plated or die cast connectors it will read as a slightly different tone, which is normal when you upgrade a few terminations in a corrosive area rather than the whole panel.
How fast can I get the Thomas & Betts 5352SST6HT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 5352SST6HT come with a warranty?
Absolutely. The Thomas & Betts 5352SST6HT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 5352SST6HT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 5352SST6HT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.