Metallics JFWP43 12 x 2-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWP43 12 x 2-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP43 12 x 2-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP43
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 2-1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Features

    • 12 Diameter, 2-1/2" Length
    • Flat Head with Phillips Drive
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.148 - 0.171
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.74 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP43 – Frequently Asked Questions

1) Are the Metallics JFWP43 screws Buy American or ARRA compliant for a government job?
No. The JFWP43 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your contract carries a domestic sourcing clause, this screw will not satisfy it.
2) Is the Metallics JFWP43 a real wood screw or a sheet metal screw?
A true wood screw. It has a tapered point and 11 threads per inch, with the thread running about two thirds of the length on nominal lengths over an inch, so the unthreaded shank under the head lets the top piece draw tight against the bottom one. Sheet metal screws thread the full length and will not clamp a lap joint the same way.
3) Can I use these zinc plated screws outdoors or in a damp location?
Keep them dry. The JFWP43 is steel with a zinc plated finish, which handles indoor humidity and incidental moisture but is not a weather or pressure-treated-lumber finish. For exterior framing, decks, or treated lumber, go to a stainless or coated exterior screw instead.
4) How are the Metallics JFWP43 screws packaged and what is the minimum order?
They ship in a jar of 100, and 100 is the order minimum. The jar weighs 1.74 lbs. Handy for an electrical or mechanical truck stock where you want a countable quantity rather than a bulk box.
5) Do these wood screws meet a recognized dimensional spec for a submittal?
Yes. The JFWP43 is built to ASME B18.6.1, with threads per ASME B18.6.1-1997. That covers head dimensions, recess geometry, and thread form, so the head width of 0.389 to 0.438 inch and the 11 threads per inch are standard values you can hold a submittal to.
6) What are #12 x 2-1/2 inch flat head wood screws typically used for on an electrical or mechanical job?
They are a mounting screw for fastening into wood framing and blocking, and Metallics lists the application as the electrical, plumbing, heating and air conditioning trades. Typical use is anchoring strut, boxes, panel backing, or equipment brackets to studs where a #12 shank and 2-1/2 inches of length get through the mounting plate and well into solid lumber.
7) Do I need to pre-drill for a #12 x 2-1/2 inch wood screw?
In hardwood or near an edge, yes. A #12 shank is heavy enough to split dense stock, and the tapered point on the JFWP43 pulls aggressively, so a pilot plus a countersink for the flat head is the right prep. In soft framing lumber away from edges most crews drive it straight with a #3 Phillips bit.
How fast can I get the Metallics JFWP43 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP43 come with a warranty?
Absolutely. The Metallics JFWP43 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP43?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP43 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!