Metallics JFM110 1/4-20 x 1-3/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.39
$0.39
Metallics JFM110 1/4-20 x 1-3/4 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM110 1/4-20 x 1-3/4 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM110
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.39
$0.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 1-3/4 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Steel Zinc Material
    • Flat head with slotted Drive
    • 1/4-20 Diameter, 1-3/4" Length
    • Zinc yellow screws are popular in electronics applications.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.131 - 0.153 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.442 - 0.477 in.
Fastener Length:
1/3/04
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.98 lbs
Product Width:
3 in
Slot Depth:
0.046 - 0.07
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Tensile Strength:
1900 lb minimum
Thread Per Inch:
20
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM110 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFM110 machine screws?
The JFM110 ships as a jar of 100 screws, and 100 count is the order minimum. So one order unit equals one 100-piece jar of 1/4-20 x 1-3/4 in. flat head slotted machine screws.
2) Does the JFM110 thread into a standard 1/4-20 tapped hole or nut?
It does. The thread is 1/4-20 UNC with 20 threads per inch, cut to ANSI/ASME B1.1, so it mates with any standard 1/4-20 UNC tapped hole, nut, or strut channel nut. Usable grip is whatever the 1-3/4 in. length leaves after your material stack.
3) Are these zinc plated screws OK for outdoor or damp locations?
These are zinc plated carbon steel, which suits dry indoor electrical work, panels, enclosures and device mounting. Zinc plating is a sacrificial coating, not stainless, so in wet, washdown or coastal exposure it will eventually corrode. For those openings go to a stainless 18-8 machine screw in the same 1/4-20 x 1-3/4 size.
4) Do these Metallics machine screws meet Buy American or ARRA requirements for a public job?
The JFM110 carries both ARRA compliant and Buy American compliant flags in the manufacturer data, with country of origin China. On federally funded work, submit those compliance designations to your spec reviewer against the specific clause in your contract, since the applicable rule varies by funding source.
5) Is the Metallics FM series a machine screw or a self tapping sheet metal screw?
FM and FMP are machine screws, fully threaded 1/4-20 UNC for a pre-tapped hole or a nut. They will not cut their own threads in sheet steel. If you are fastening into unthreaded sheet metal, use a self drilling or self tapping screw instead, or tap the hole to 1/4-20 first.
6) How much does a jar of 100 of these 1/4-20 screws weigh for shipping?
A full jar runs 1.98 lbs. Handy if you are palletizing a bulk MRO order or checking a parcel weight on a multi-jar buy.
How fast can I get the Metallics JFM110 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM110 come with a warranty?
Absolutely. The Metallics JFM110 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM110?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM110 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!