Metallics JFM104 1/4-20 x 2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.43
$0.43
Metallics JFM104 1/4-20 x 2 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM104 1/4-20 x 2 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM104
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.43
$0.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 2 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Flat head with slotted Drive
    • 1/4-20 Diameter, 2" Length
    • Zinc yellow screws are popular in electronics applications.
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.131 - 0.153 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.442 - 0.477 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.55 lbs
Product Width:
3 in
Slot Depth:
0.046 - 0.07
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Tensile Strength:
1900 lb minimum
Thread Per Inch:
20
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM104 – Frequently Asked Questions

1) What thread does the Metallics JFM104 machine screw take, and will it thread into a standard 1/4-20 tapped hole or nut?
It's a 1/4-20 UNC thread, 20 threads per inch, made to ANSI/ASME B1.1. That means it threads into any standard 1/4-20 coarse tapped hole, nut, or strut channel nut. Overall length is 2 inches.
2) Will a flat head slotted machine screw sit flush in a countersunk hole in an enclosure or device plate?
Yes, that's what the flat head is for. The JFM104 head measures 0.442 to 0.477 in. across with a head height of 0.131 to 0.153 in., built to ASME B18.6.3-1998, so it drops into a standard 82-degree countersink for a 1/4-20 flat head screw and finishes flush with the surface.
3) Can I use these on a federally funded job with Buy American requirements?
No. The JFM104 is listed as not Buy American compliant and not ARRA compliant, with multiple countries of origin. For a project with domestic sourcing language in the spec, you need a domestically produced fastener instead.
4) Are these zinc plated screws OK for outdoor or damp locations?
The JFM104 is low carbon steel with a zinc finish. Zinc plating handles indoor, dry, and lightly damp conditions, which covers most panel, enclosure, and device work. For wet locations, exterior use, or corrosive or coastal environments, go with a stainless machine screw of the same 1/4-20 x 2 in. size instead, since plating will eventually give up on steel.
5) How are these machine screws packaged and what is the minimum I can buy?
They come in a jar, 100 pieces, and 100 is the order minimum. Jar weight is 2.55 lbs. If you need a different size or a larger count, Metallics offers other sizes and quantities in the FM and FMP series by request.
6) Do these 1/4-20 screws come with nuts or washers?
No, the jar is screws only, 100 flat head slotted machine screws. Order 1/4-20 hex nuts, lock nuts, or flat washers separately if the assembly needs them. In a tapped hole or a strut channel nut, no additional hardware is needed.
7) What trades actually use a 1/4-20 x 2 in. flat head slotted machine screw?
Metallics positions the FM series for electrical, plumbing, and heating and air conditioning work. The 2 in. length gives you enough reach to go through a device plate plus spacers or a thick mounting surface and still pick up a nut or tapped hole on the far side, and the flat head keeps the face clean where a protruding head would interfere.
How fast can I get the Metallics JFM104 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM104 come with a warranty?
Absolutely. The Metallics JFM104 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM104?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM104 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!