Metallics JSHC14414 1/4-20 x 4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,157.14
Image coming soon

Metallics JSHC14414 1/4-20 x 41/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC14414

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,157.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 41/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Features

    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • 1/4-20 Diameter, 41/4" Length
    • Alloy Steel Black Material
    • Socket head with Hex Drive
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.244 - 0.25 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.365 - 0.375 in.
Fastener Length:
4-1⁄4
Hardness:
Rockwell C39
Hex Size:
16-Mar
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Slot Depth:
0.12
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
20
Thread Type:
UN
Wall Thickness:
0.095
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC14414 – Frequently Asked Questions

1) What size counterbore do I need for a 1/4-20 socket head cap screw like the Metallics JSHC14414?
Size the counterbore off the head: the JSHC14414 head measures 0.365 to 0.375 in. across and 0.244 to 0.25 in. high, so a counterbore just over 3/8 in. diameter and 1/4 in. deep will bring the head flush. Because it's internally wrenched with a hex key, you don't need the wrench clearance around the head that an external hex head screw demands. Head geometry follows ASME B18.3-2012.
2) Is a socket head cap screw stronger than a grade 8 hex bolt in 1/4-20?
In this alloy steel socket head, yes. The JSHC14414 is rated 180,000 psi minimum tensile and 162,000 psi minimum yield, above what equivalent-size grade 5 or grade 8 hex head cap screws deliver, and it does it in less surface area because the drive is internal rather than external. Hardness is Rockwell C39.
3) Will these 1/4-20 cap screws thread into a standard SAE tapped hole or nut?
They will. Threads are 1/4-20 UN, 20 threads per inch, so they mate with any standard 1/4-20 UNC tapped hole, nut, or insert. Thread pitch is the common coarse series for 1/4 in., not fine.
4) Do these cap screws qualify for a Buy American or ARRA-funded project?
No. The JSHC14414 is flagged not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your job carries domestic-sourcing requirements, this part won't satisfy them.
5) Is the black finish on these alloy steel socket head cap screws corrosion resistant for outdoor use?
The JSHC14414 is alloy steel with a black finish, which is a plain oxide-type appearance, not a plated or galvanized coating. Treat it as an indoor or protected-location fastener. For wet, exterior, or washdown work, specify a plated or stainless cap screw instead.
6) How do these Metallics socket head cap screws ship, and is there a minimum order?
The JSHC14414 is packaged in a jar with an order minimum of 100 count. You're buying by the jar quantity rather than loose onesies, which suits a shop or truck stock rebuy.
How fast can I get the Metallics JSHC14414 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC14414 come with a warranty?
Absolutely. The Metallics JSHC14414 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC14414?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC14414 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!