You may also like
19786 Viega ProPress 90° stub-out Copper, 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- d
- Country Of Origin:
- Made In USA
- Material Type:
- Copper
- Model Number:
- 2975.2
- Product Dimension:
- 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Other Fittings
- Product Type:
- Fitting
- Product Length:
- 4.3"
- Product Height:
- 2.1"
- Product Weight:
- 0.279 lbs
- Product Width:
- 8.063"
- Product Material:
- Copper
Viega V19786 – Frequently Asked Questions
1) Do I need to solder the Viega 19786 stub-out?
No torch needed. The 19786 is a ProPress fitting, so it is joined with a press tool and the correct 1/2 inch jaw rather than solder. That is the reason most contractors reach for it on occupied buildings and finished walls, where open flame means a hot work permit and a fire watch.
2) What is a 90 degree stub-out used for on a rough-in?
A stub-out elbow turns the supply line 90 degrees out of the wall and leaves a plain copper tube end projecting into the room, ready to be trimmed to length and finished with a stop valve and escutcheon. It is the standard way to terminate a lavatory, toilet, or sink supply at rough-in. The Viega 19786 does that in 1/2 inch copper with a press connection on the inlet side.
3) Can I use the Viega 19786 stub-out on PEX or CPVC supply lines?
No. The 19786 is a copper ProPress fitting and presses onto copper tube only. If the wall is piped in PEX, you need a PEX stub-out ell with the matching connection method for that system, not this fitting.
4) How far does the Viega 19786 stub-out project out of the wall?
Published dimensions on the 19786 are 4.3 inches length, 2.1 inches height, with the fitting weighing 0.279 lbs. Those are the overall figures for the fitting, so use the 4.3 inch leg as your planning number for how much copper you have to work with before trimming back to the stop valve.
5) Does the Viega 19786 stub-out come with a stop valve or escutcheon?
The 19786 is the fitting only, a 1/2 inch copper 90 degree stub-out. Trim items are ordered separately: the angle or straight stop, the escutcheon, and any drop-ear bracket or copper stub-out clamp you use to anchor the leg to blocking so the valve does not move when it is turned.
How fast can I get the Viega V19786 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega V19786 come with a warranty?
Absolutely. The Viega V19786 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega V19786?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega V19786 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.