You may also like
19791 Viega ProPress 90° stub-out Copper, 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- d
- Country Of Origin:
- United States
- Material Type:
- Copper
- Model Number:
- 2975.2
- Product Dimension:
- 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Other Fittings
- Product Type:
- Fitting
- Product Length:
- 5.05"
- Product Height:
- 2.1"
- Product Weight:
- 0.453 lbs
- Product Width:
- 8.438"
- Product Material:
- Copper
Viega V19791 – Frequently Asked Questions
1) What size pipe does the Viega 19791 ProPress 90 degree stub-out fit?
It's a 3/4 inch copper ProPress fitting, so it presses onto 3/4 inch copper tube. Part number 19791, Viega model 2975.2.
2) Do I need a special tool to install a Viega ProPress stub-out, or can I solder it?
ProPress is a cold press connection, not a solder joint. The 19791 stub-out is made up with a Viega-approved press tool and the correct 3/4 inch jaw, so no torch, flux or solder is involved. If you don't own a press tool, this fitting isn't the right choice for the job.
3) What is a 90 degree stub-out fitting used for in a plumbing rough-in?
A stub-out gives you the elbow and the straight leg in one piece, so you press it onto the branch line in the wall and the leg projects out through the drywall to land a valve or supply. The Viega 19791 handles a 3/4 inch copper branch and replaces an elbow plus a cut length of tube plus a second joint.
4) How far does the Viega 19791 stub-out stick out of the wall?
The fitting is listed at 5.05 inches long and 2.1 inches high, which is what sets how deep in the stud bay you can press it and still have leg left past the finished wall surface. Lay it out against your finish thickness before you press.
5) Is the Viega 19791 stub-out copper or brass?
Copper. Both the material fields list copper, so it's the same metal as the tube it presses onto, with no dissimilar-metal joint at the connection.
6) Where is the Viega 19791 ProPress fitting made?
Made in USA, per the country of origin on the 19791. That matters on public and institutional work carrying domestic-sourcing requirements.
7) How much does the Viega 3/4 inch ProPress stub-out weigh?
0.453 lbs each. Light enough that a hanger isn't carrying any real load from the fitting itself, though the stub leg still wants to be secured to blocking or a bracket before the valve goes on.
How fast can I get the Viega V19791 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega V19791 come with a warranty?
Absolutely. The Viega V19791 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega V19791?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega V19791 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.