You may also like
1H JMPR BRD ASY1 350 H7/16x2 L24
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Non-Insulated
- Product Group:
- Grounding & Bonding
- Product Net Depth Length:
- 24 in609.6 mm
- Product Type:
- Extra-Flexible Jumper Braid
- Selling Unit Of Measure:
- each
- Standards:
- NEMA
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Grounding Devices
Blackburn FBE1H035A3-24 – Frequently Asked Questions
1) How long is the Blackburn FBE1H035A3-24 jumper braid?
The FBE1H035A3-24 braid measures 24 inches (609.6 mm) overall, which is the L24 in the part number. That length is fixed, so if you need a shorter or longer bond across the same equipment you have to move to a different length in the FBE series rather than cutting this one down, since the terminals are factory attached.
2) Does the Blackburn FBE1H035A3-24 come with the terminals already attached?
Yes, it is supplied as an assembly with the terminals already on both ends, which is what the ASY in the description refers to. Each end carries the 7/16 inch hole pattern noted as H7/16x2 in the part designation, so it bolts straight to prepared pads or lugs without any crimping or on-site termination.
3) Is this Blackburn grounding braid insulated?
No. The FBE1H035A3-24 is a non-insulated braid, so the conductor is bare along its whole length. Treat it as an exposed bonding conductor: keep it clear of live parts and moving equipment, and do not rely on the braid itself for any separation from adjacent energized hardware.
4) What is an extra-flexible jumper braid used for instead of a solid bonding conductor?
A braid like the Blackburn FBE1H035A3-24 is built for bonding across joints that move or vibrate, expansion joints, hinged enclosure doors, switchgear sections, transformer or motor frames, and busway joints. A solid or stranded bonding jumper work-hardens and eventually cracks when it is flexed repeatedly; the flat braid construction absorbs that movement while keeping a low-impedance path. For a fixed, non-moving bond, a standard bonding jumper or ground strap is the simpler choice.
5) Is the Blackburn FBE1H035A3-24 made in the USA, and does it meet a recognized standard?
Country of origin is the United States, and the braid assembly is built to NEMA. That matters on government, healthcare, and other institutional work where domestic sourcing and a named standard both have to appear on the submittal.
6) Is this Blackburn jumper braid sold individually or in packs?
Sold each. The FBE1H035A3-24 selling unit is a single braid assembly, so if you are bonding multiple switchgear sections or a run of busway joints, order one per joint rather than expecting a multi-pack.
How fast can I get the Blackburn FBE1H035A3-24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn FBE1H035A3-24 come with a warranty?
Absolutely. The Blackburn FBE1H035A3-24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn FBE1H035A3-24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn FBE1H035A3-24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.