You may also like
2" Roof Jack 26ga 2-Piece Galv
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics MF200 – Frequently Asked Questions
1) What size pipe does the Metallics MF200 roof jack fit?
The MF200 is a 2 inch roof jack, so it is sized for 2 inch pipe or conduit penetrating the roof deck. For other pipe sizes you need the matching size jack rather than forcing this one over a larger stack.
2) Why is the Metallics MF200 roof jack a two-piece design instead of one piece?
The MF200 is built as a 2-piece unit: the base flashing sets on the roof surface around the 2 inch penetration and the separate collar or cap piece slips down over the pipe. That lets you install it without threading a one-piece boot over the full length of the pipe, which matters when the stack is already in place or has a fitting on the end.
3) Is the Metallics MF200 roof jack galvanized or painted steel?
Galvanized steel, in 26 gauge. The zinc coating is what keeps a roof penetration flashing from rusting out where it sits in standing water and under direct weather, and 26 gauge is a light sheet gauge that still forms to the roof plane.
4) Can I use a 2 inch roof jack for electrical conduit coming through the roof, or is it only for plumbing vents?
The Metallics MF200 is a 2 inch galvanized roof jack and Metallics catalogues it on the electrical side, so it is used for weather-sealing 2 inch conduit penetrations as well as pipe stacks. What governs the choice is the outside size of what is coming through the deck, not the trade the pipe belongs to.
5) How do I order the Metallics 2 inch roof jack and is there more than one version?
There is a single configuration to order, model MF200, the 2 inch 26 gauge galvanized two-piece jack. No finish, handing, or pitch options to specify, so the only decision is pipe size.
How fast can I get the Metallics MF200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MF200 come with a warranty?
Absolutely. The Metallics MF200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MF200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MF200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.