You may also like
25456 Viega MegaPressG tee Smart Connect technology Carbon steel, 2'' x 2'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 2'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.547"
- Product Height:
- 2.894"
- Product Weight:
- 2.358 lbs
- Product Width:
- 3.685"
- Product Material:
- Carbon steel
Viega 25456 – Frequently Asked Questions
1) What are the three connections on the Viega MegaPressG 25456 tee?
The 25456 is a 2 inch x 2 inch x 1/2 inch reducing tee with a P1 x P2 x FPT configuration. Both 2 inch run ends are press connections, and the 1/2 inch branch is female pipe thread, so the branch takes a threaded male fitting, nipple or valve rather than a press tool.
2) Can I use a MegaPressG carbon steel tee on a gas line?
MegaPressG is Viega's gas-rated press system, and the 25456 is a carbon steel MegaPressG tee built for black iron gas piping. It presses onto 2 inch carbon steel pipe on the run. Nothing about it suits it to potable water lines, which are a different Viega system in copper or stainless.
3) What does Smart Connect on this Viega press tee actually do for me on the job?
Smart Connect is Viega's unpressed-connection feature: a fitting that hasn't been pressed will leak under test pressure so you find it during pressure testing instead of after the wall closes. On a 2 inch gas tee that matters, because the 25456 has two press ends on the run and both have to be crimped.
4) Is the Viega 25456 a straight tee or a reducing tee?
Reducing. The run stays 2 inch on both ends and the branch drops to 1/2 inch, so it's the fitting you use to pull a small takeoff, a drip leg or a gauge tap off a 2 inch main without adding a bushing.
5) Where is the Viega 25456 press tee made, and what is it made of?
Carbon steel, made in Germany. Carbon steel is the standard material for black iron gas distribution, which is why this MegaPressG tee is offered in it rather than copper or stainless.
6) What part number do I order for the Viega 2 x 2 x 1/2 MegaPressG tee?
Order Viega 25456. That MPN covers the MegaPressG carbon steel tee in 2 inch x 2 inch x 1/2 inch with the FPT branch.
How fast can I get the Viega 25456 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25456 come with a warranty?
Absolutely. The Viega 25456 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25456?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25456 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.