You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Actuator:
- Pushbutton, flush
- Actuator Color:
- Black, red
- Contact Configuration:
- 1NO-2NC
- Enclosure Material:
- Die cast
- Legend:
- START/STOP
- Notes:
- Enclosure has corrosion resistant coating
- Number Of Elements:
- 2
- Operating Mode:
- Momentary
- Series:
- 10250T
- Department:
- Electrical
- Product Type:
- 30.5 mm, Heavy-Duty
- Product Length:
- .036 IN
- Product Details:
- 30.5 mm, Heavy-Duty
- Mounting Method:
- Surface
- Performance Rating:
- NEMA 4, 4X, 12, 13
- Product Height:
- .055 IN
- Product Weight:
- .4 LB
- Product Width:
- .05 IN
B-LINE 10250T4320 – Frequently Asked Questions
1) Can the B-Line 10250T4320 control station be used outdoors or in a washdown area?
The 10250T4320 start/stop station carries NEMA 4, 4X, 12 and 13 ratings, so it handles hosedown, dust, dripping oil and coolant. The die cast enclosure also has a corrosion resistant coating, which is what makes the 4X rating usable in wet or mildly corrosive plant areas like food processing and car wash bays.
2) What contacts do I get on the B-Line 10250T4320 start/stop station for wiring a motor starter?
Contact configuration is 1NO-2NC across the two operators. That is the standard three-wire control arrangement: the green start button's normally open contact seals in through the starter auxiliary, and the stop button's normally closed contact breaks the coil circuit. Both buttons are momentary, so nothing latches mechanically.
3) Is the B-Line 10250T4320 a two-button station, and what do the buttons look like?
Two elements, both flush pushbuttons, one black and one red, legended START/STOP. Flush buttons sit level with the bezel so they resist accidental operation from a brushed sleeve or a passing cart, unlike extended or mushroom heads.
4) Does the 10250T4320 mount on a panel or on the wall?
It is a surface mount assembled station, so it bolts to a wall, machine frame or column rather than dropping into a panel cutout. The enclosure comes assembled with the operators already installed, so there is no 30.5 mm hole to punch.
5) Will the 10250T4320 accept standard 30.5 mm heavy-duty operators if I need to change a button later?
The station is built on the Eaton 10250T 30.5 mm heavy-duty line, so the operator openings are the industry standard 30.5 mm size used across that family. That is the same hole size most heavy-duty industrial pushbuttons and selector switches use, which makes later swaps straightforward.
6) Can I use the 10250T4320 as a maintained on/off switch instead of momentary start/stop?
No. Both operators are momentary, so the buttons return on release and hold nothing in. If your circuit has no starter or relay to seal the run command in, you need a maintained device such as a selector switch, not this station.
How fast can I get the B-LINE 10250T4320 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 10250T4320 come with a warranty?
Absolutely. The B-LINE 10250T4320 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 10250T4320?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 10250T4320 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.