3M Cold Shrink Quick Splice Lo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$112.49
3M Cold Shrink Quick Splice Low Voltage QSLV-M

3M Cold Shrink Quick Splice Low Voltage QSLV-M

(No reviews yet) Write a Review

Model: 7000058805

In Stock (leaves warehouse same day if ordered before 3pm ET)

$112.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3M, Cold Shrink Quick Splice Low Voltage QSLV-M 2-500, Non-shielded, 1 kV, 10/case

  • Features

    • Sleeve is made of EPDM rubber which contains no chlorides nor sulfur, sealing mastic provides a water-resistant sealing
    • Factory-expanded for easy installation
    • Open-ended tubular sleeves with a sealing mastic on each end for range taking and water resistant tight seal
    • Rated for up to 1 kV applications
    • The third, center segment of the core remains inside the cold shrink tube, acting as a support structure
    • For direct-bury, secondary low-voltage, non-shielded cable splices


7000058805 - spec sheet

Manufacturer Resources

3M Splices Catalog Section

Product Specs

Shelf Life:
1800
Department:
Electrical
Product Model:
Cold Shrink
Manufacturing Origin:
USA
Country Of Origin:
United States
Cable Shielding:
Non-shielded
Etim Class 7 0:
EC001169
Splice Type:
Inline
Number Of Conductors:
3
Rohs Eu Comments:
RoHS 2011/65/EU compliant without exemption
Insulation Outer Diameter Metric:
10.16 mm
Etim Class 8 0:
EC001169
Cable Type:
Power Cable
Conductor Material:
Aluminum
Product Voltage:
1 kV
Product Color:
Black
Product Technology:
Cold Shrink
Product Type:
Cold Shrink Splice & Termination
Product Group:
Wire Connectors & Terminals
Product Subgroup:
Splice Kits

3M 7000058805 – Frequently Asked Questions

1) Can the 3M QSLV-M cold shrink splice be direct buried?
Yes. The QSLV-M Quick Splice is built for direct-bury, secondary low-voltage, non-shielded cable splices. The EPDM sleeve carries a sealing mastic at each end that forms a water-resistant seal against the cable jacket, so it holds up in below-grade and wet locations without tape buildup or a heat source.
2) What conductor sizes does the 3M QSLV-M quick splice cover?
Two range-taking sizes are offered: 8-2/0 AWG (MPN 7000058804) and 2-500 kcmil (MPN 7000058805). Pick by the conductor range, not just the cable OD, since each sleeve takes a spread of sizes. For a 500 kcmil secondary run you need the 2-500 kcmil version.
3) What voltage is the QSLV-M rated for, and can I use it on shielded medium voltage cable?
Rated up to 1 kV, and only for non-shielded cable. It is a secondary low-voltage inline splice with no shielding layer or stress control, so it must not be used on shielded medium-voltage feeders. Those need a shielded cold shrink splice kit rated for the class of the circuit.
4) Do I need a torch or heat gun to install the 3M cold shrink quick splice?
No flame or heat gun. The sleeve is factory-expanded on a removable core, so you position it over the connection and pull the core out to shrink it down cold. That makes it usable in a trench, a vault, or anywhere a hot work permit would be a problem.
5) Why does part of the core stay inside the 3M QSLV-M after installation?
By design. The third, center segment of the core stays inside the cold shrink tube and acts as a support structure over the connector area. Leave it in place, it is not leftover packaging, and removing it defeats the mechanical support the splice is built around.
6) Will the QSLV-M work on aluminum secondary conductors?
Yes, it is listed for aluminum power cable conductors. The sleeve itself is an EPDM insulating and sealing cover, so the connector you use under it still has to be rated for the metal you are splicing (AL9CU or equivalent for aluminum).
7) Is a connector or lug included with the 3M QSLV-M quick splice?
The QSLV-M is the cold shrink sleeve with mastic only. It is an open-ended tubular sleeve that goes over a connection you make separately, so order your compression or mechanical connectors for the conductor size and metal as a separate line item.
8) Can I use one QSLV-M sleeve for a three conductor cable?
It is an inline single-conductor style sleeve, so on a three-conductor secondary you splice and sleeve each conductor individually rather than jacketing the whole bundle in one tube. Count one sleeve per conductor when you figure quantities, which is why they come ten to a case.
9) How is the 3M QSLV-M packaged for a job, and does it have shelf life limits?
It ships 10 per case, which suits crews splicing multiple secondary runs on one pull. Cold shrink parts are stored expanded, and 3M assigns this one a shelf life figure of 1800 days, so rotate stock rather than leaving cases on a shelf indefinitely.
10) Is the 3M cold shrink quick splice free of sulfur and chlorides, and is it RoHS compliant?
The sleeve is EPDM rubber containing no chlorides and no sulfur, which matters where corrosion of the connector or conductor is a concern. It is also RoHS 2011/65/EU compliant without exemption, and it is manufactured in the United States.
How fast can I get the 3M 7000058805 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 7000058805 come with a warranty?
Absolutely. The 3M 7000058805 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 7000058805?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the 3M 7000058805 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!