3M 7010350272 3M, Heat Shrink ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$98.17
$48.17
3M 7010350272 3M, Heat Shrink Thin-Wall Tubing FP-301-1 1/2-6"-Black-10-3 Pc Pks, 6 in Length pieces, 3 pieces/pack, 10 packs/case

3M 7010350272 3M, Heat Shrink Thin-Wall Tubing FP-301-1 1/2-6"-Black-10-3 Pc Pks, 6 in Length pieces, 3 pieces/pack, 10 packs/case

(No reviews yet) Write a Review

Model: 7010350272
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$98.17
$48.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3M, Heat Shrink Thin-Wall Tubing FP-301-1 1/2-6"-Black-10-3 Pc Pks, 6 in Length pieces, 3 pieces/pack, 10 packs/case

  • Features

    • HIGH-STRENGTH PROTECTION: Balances electrical, physical, and chemical properties for various industrial and military applications
    • A VARIETY OF APPLICATIONS: Offers a 2:1 shrink-fit ratio and serves as protection in wire-harnessing, split-resistance covering, wire marking, wire bundling, and component packaging
    • KEY SPECIFICATIONS: UL Listed, File E-39100, SAE AS23053/5, Class 1 (all colors), Class 2 (clear), CSA Certified, and RoHS 2011/65/EU Compliant
    • FLAME-RETARDANT TUBING: For applications up to 600V (clear is not flame retardant)
    • FOR DEMANDING CONDITIONS: Performs at an operating temperature up to 275 °F (135 °C)

Manufacturer Resources

Product Specs

Ais Url Article Information Sheet :
https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSu9n_zu8l00xl8mSOY_eOv70k17zHvu9lxtD7xtBevSS
Country Of Origin:
United States
Elongation Uom:
%
Etim Class 7 0:
EC000217
Etim Class 8 0:
EC000217
Expanded Inner Diameter:
1.5 in
Expanded Inner Diameter Metric :
38.10 mm
Flame Retardant:
Yes
Heat Shrink Type:
Single-Wall Polyolefin Heat Shrink Tubing
Inner Diameter After Shrink Imperial :
0.75 in
Inner Diameter After Shrink Metric :
19.05 mm
Inner Diameter Before Shrink Imperial :
1.5 in
Inner Diameter Before Shrink Metric :
38.1 mm
Manufacturing Origin:
USA
Maximum Operating Temperature Celsius :
135
Maximum Operating Temperature Celsius Uom:
Degree
Maximum Operating Temperature Fahrenheit :
275.0 Degree
Mil Spec:
AMS-DTL-23053/5, Class 2
Non Corrosive:
Yes
Operating Temperature Celsius :
-55 to 135 Degrees Celsius
Operating Temperature Fahrenheit :
-67 °F to 275 °F
Overall Length Imperial :
6.0 in
Product Color:
Black
Product Form:
6 in (15.24 cm) pieces
Product Material:
Polyolefin
Rds Url Regulatory Data Sheet :
https://cdmsweb.3m.com/ingredientcommunication/file/Media/8Vby43iOrAw=
Recovered Inner Diameter:
0.75 in
Recovered Inner Diameter Metric :
19.1 mm
Rohs Eu Comments:
RoHS 2011/65/EU compliant without exemption
Shelf Life:
3600
Shrink Ratio:
2:01
Size Metric :
38.1 mm
Solution For:
Access Network: FTTH/FTTB/CATV
Tubing Type:
Single (Thin) Wall
Ul Bug Temperature Celsius :
125 Degrees Celsius
Ul Bug Temperature Fahrenheit :
257 Degrees Fahrenheit
Ul Bug Voltage:
600 Volt
Units Per Case:
3
Department:
Electrical

3M 7010350272 – Frequently Asked Questions

1) What cable diameter range will 3M FP-301 1-1/2 inch heat shrink tubing fit?
The FP-301 1-1/2 inch size goes on at a 1.5 inch (38.1 mm) inside diameter and recovers down to 0.75 inch (19.05 mm) at a 2:1 shrink ratio. So it slides over anything up to about 1-1/2 inches and grips tight down to 3/4 inch. If your bundle or connector is smaller than 3/4 inch recovered, step down to a smaller size or you will be left with loose tubing that never fully conforms.
2) Is FP-301 rated for 600V circuits?
Yes. The UL bug rating on FP-301 is 600 volts at 125 C (257 F), and the tubing is flame retardant in black. It is UL Listed under File E-39100 and CSA Certified. That covers typical line-voltage commercial and industrial wiring insulation repair and splice covering.
3) Is this single-wall or adhesive-lined dual-wall tubing, and will it seal out water?
FP-301 is single-wall thin-wall polyolefin with no adhesive liner. It gives you mechanical abrasion protection, strain relief and dielectric covering, but it does not create a moisture seal. For direct-burial, underground pedestal, or wet-location splices you want an adhesive-lined dual-wall product instead.
4) How long are the pieces and how many do I get in a case of 3M 7010350272?
These come as pre-cut 6 inch (15.24 cm) pieces rather than a continuous roll, packed 3 pieces per pack with 10 packs to the case. Handy for splice and terminal work where a fixed 6 inch cover is all you need, but if you are covering a long harness run you want spooled tubing instead of cut lengths.
5) What temperature range can this heat shrink tubing handle in service?
Continuous operating range is -55 C to 135 C (-67 F to 275 F). That puts it in range for engine compartments, motor leads, and unconditioned outdoor or rooftop runs as well as cold storage. Note the UL electrical rating is held to 125 C, so for listed 600V work treat 125 C as the working ceiling.
6) Does FP-301 meet military spec for wire harnessing?
FP-301 is built to AMS-DTL-23053/5, Class 2, and is also called out to SAE AS23053/5 Class 1 in the colored versions. Black is a Class 1 flame retardant color. It is non-corrosive and RoHS 2011/65/EU compliant without exemption, which matters on export builds and defense subassemblies.
7) Can I use this 1-1/2 inch tubing over a large multi-conductor bundle or a big connector body?
Yes, that is the usual job for this size. Expanded at 1.5 inches it slips over fat cable bundles, large ring terminals, and coax or drop hardware, then recovers to 0.75 inch to grip. 3M lists FP-301 for access network work including FTTH, FTTB and CATV. Just confirm the recovered 0.75 inch is not larger than what you are covering, or it will not tighten down.
8) Where is 3M FP-301 heat shrink tubing made?
Made in the USA, which is what buyers with Buy American or TAA-style sourcing requirements on federal and institutional jobs need to document.
9) What is the exact part number to reorder this black 1-1/2 inch FP-301 tubing?
Order 3M part 7010350272, described by 3M as FP-301-1 1/2-6"-Black-10-3 Pc Pks. That number covers the black, 1-1/2 inch size, 6 inch cut pieces, 3 to a pack and 10 packs per case. Distributors should quote the 7010350272 number to avoid landing on a spooled or different-diameter FP-301 configuration.
How fast can I get the 3M 7010350272 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 7010350272 come with a warranty?
Absolutely. The 3M 7010350272 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 7010350272?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the 3M 7010350272 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!