You may also like
4X4X2 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 4
- Size 2:
- 4
- Size 3:
- 2
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 8.8 lbs
ASC Engineered Solutions 311057004 – Frequently Asked Questions
1) What size branch does the ASC Engineered Solutions 4x4x2 galvanized malleable iron tee reduce to?
It runs 4 inch on both run ends and reduces to a 2 inch branch outlet, so you can pull a 2 inch line off a 4 inch main without a separate bushing. All three openings are female pipe thread.
2) Is this galvanized tee approved for fire sprinkler piping?
It carries UL/FM approval, which is what a sprinkler contractor needs for threaded fittings on a fire protection system. Class is standard pattern per ASME B16.3.
3) Is this a standard or extra heavy malleable iron tee?
Standard pattern (Class 150), not extra heavy. If your drawing calls for a Class 300 extra heavy fitting, this is not the one to order.
4) Is the galvanizing on this tee hot dip, and will it hold up outdoors?
The coating is galvanized to ASTM A-153, the hot dip zinc spec for iron and steel hardware. That is the finish used on exterior and damp service threaded fittings rather than an electroplate.
5) What is this 4x4x2 tee made of, and can I use it on a black iron system?
The body is malleable iron to ASTM A-197. Mechanically it is the same casting as a black malleable fitting, the difference is the zinc coating, so it threads into the same NPT pipe. Mixing a galvanized fitting into a black iron run is a coating and corrosion decision for your spec, not a threading problem.
6) Do I need a reducing bushing to land a 2 inch line on this tee?
No. The 2 inch branch is already tapped FPT at 2 inch, so a 2 inch male nipple threads straight in. A bushing would only be needed if you were dropping below 2 inch.
7) What is the manufacturer part number for this ASC 4x4x2 galvanized tee?
Order it as ASC Engineered Solutions part 311057004, a 4x4x2 galvanized malleable iron tee, standard pattern, FPT on all three ends.
How fast can I get the ASC Engineered Solutions 311057004 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311057004 come with a warranty?
Absolutely. The ASC Engineered Solutions 311057004 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311057004?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311057004 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.