Metallics JSRM11P 6-32 x 1 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.39
$43.00
Metallics JSRM11P 6-32 x 1 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSRM11P 6-32 x 1 in. Round Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSRM11P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.39
$43.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 18-8 stainless Material
    • Round head with Phillips Drive
    • 6-32 Diameter, 1" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.091 - 0.103 in.
Fastener Head Type:
Round
Fastener Head Width:
0.24 - 0.26 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.056 - 0.084
Phillips Recess Diameter:
0.149 - 0.162
Phillips Recess Width:
0.027
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.44 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.045 - 0.073
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SRM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSRM11P – Frequently Asked Questions

1) Do these Metallics machine screws meet Buy American or ARRA requirements for a government job?
No. The JSRM11P is listed as not Buy American compliant and not ARRA compliant, with country of origin shown as multiple. If your spec carries a domestic-content clause, these will not satisfy it.
2) What size Phillips screwdriver or bit do these 6-32 Metallics screws take?
A #2 Phillips. The recess runs 0.149 to 0.162 in. in diameter with a depth of 0.056 to 0.084 in., so a #1 bit will cam out and chew the recess. Stock #2 bits in the pouch if you are running a jar of these through a driver.
3) Are these stainless screws OK for outdoor or damp-location work?
They are 18-8 stainless, the common austenitic grade used where plated steel would rust, so they hold up in wet and outdoor locations far better than zinc-plated hardware. Metallics lists the application as electrical, plumbing, heating and air conditioning work. For chloride-heavy coastal or pool chemical exposure, 316 is the step up from 18-8.
4) How are the Metallics JSRM11P screws packaged and what is the minimum order?
They come in a jar of 100, and 100 is the minimum order quantity. The jar weighs 0.44 lbs. Good for a service van or a shop drawer rather than a one-off repair.
5) How strong are 18-8 stainless 6-32 machine screws, and can I torque them down hard?
Metallics rates these at 80,000 psi minimum tensile with a hardness of Rockwell B85 to B95. Stainless of this grade is softer than hardened alloy steel and it galls when driven fast against a stainless nut, so run them slow and do not gun them. Metallics also notes that tensile figures for stainless machine screws are approximations, since there is no single performance standard for them.
6) Round head versus flat head machine screw: which should I use here?
The JSRM11P is a round head, meaning the head sits on top of the surface with a domed profile rather than sinking into a countersink. Use round head where the material is thin or unprepped, like sheet metal enclosures, strut fittings and cover plates. If the part has a countersunk hole and you need the head flush, a flat head screw is the one to order instead.
7) Do these screws come with nuts?
No. The JSRM11P is a screw only, supplied as a jar of 100. Machine screws thread into a tapped hole or take a separate nut, so if you are through-bolting you will need 6-32 nuts and any washers ordered separately.
How fast can I get the Metallics JSRM11P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM11P come with a warranty?
Absolutely. The Metallics JSRM11P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM11P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM11P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!