Metallics JSPMP78SS 6-32 x 1/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.23
$0.23
Metallics JSPMP78SS 6-32 x 1/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP78SS 6-32 x 1/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP78SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.23
$0.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with Phillips Drive
    • 18-8 Stainless Material
    • 6-32 Diameter, 1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
4-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.22 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP78SS – Frequently Asked Questions

1) Will a 6-32 x 1/4 in. pan head screw work for mounting device plates and switches in an electrical box?
6-32 is the standard thread for electrical device and cover plate mounting, and the Metallics JSPMP78SS is a 6-32 machine screw with 32 threads per inch intended for the electrical, plumbing, heating and air conditioning trades. At 1/4 in. long it is short, so it suits shallow tapped holes and thin plates. If you are reaching through a thick plate or an added spacer, you will need a longer 6-32 screw instead.
2) Can I use these on a federally funded job with Buy American requirements?
No. The JSPMP78SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. For a job with domestic sourcing requirements you will need a domestically produced 6-32 fastener.
3) What driver do I need for these Phillips pan head machine screws?
A #2 Phillips bit. The JSPMP78SS has a Phillips drive with a 0.159 in. recess diameter and a recess penetration gaging depth of 0.055 to 0.080 in., so a #2 tip seats fully without camming out.
4) How much clearance does the pan head take up, and will it sit low enough under a cover plate?
Head height runs 0.087 to 0.097 in. and head width 0.256 to 0.270 in. That is a low-profile round-top pan head, so it clears most cover plates and brackets, but it is not flush. If your hole is countersunk and you need the head buried, use a flat head screw instead.
5) Are these stainless screws OK for damp or outdoor locations?
These are 18-8 stainless, the common austenitic grade used where plated steel would rust, so they hold up in damp interior and general exterior conditions better than a zinc-plated screw. For salt spray or pool chemical exposure, a 316 stainless fastener is the better call.
6) Do these screws meet a dimensional spec I can put on a submittal?
Head, drive and thread dimensions conform to ASME B18.6.3-2010, with material called out to SAE. Tensile strength is listed at 80,000 psi minimum, though stainless machine screw strength figures are approximations since there is no single performance standard for them.
7) Will a machine screw like this thread into sheet metal or drywall?
No. A 6-32 machine screw has a straight machine thread and needs a pre-tapped hole or a mating nut, which is why it works in device boxes, brackets and enclosures with tapped bosses. For bare sheet metal use a self-tapping sheet metal screw; for drywall use an anchor.
8) How are the Metallics 6-32 x 1/4 in. stainless machine screws packaged and what is the minimum I can buy?
They come in a jar of 100, which is the order minimum. Shipping weight on the jar is 0.22 lbs.
How fast can I get the Metallics JSPMP78SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP78SS come with a warranty?
Absolutely. The Metallics JSPMP78SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP78SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP78SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!