Metallics JSPMP16SS 8-32 x 3/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.47
$0.47
Metallics JSPMP16SS 8-32 x 3/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP16SS 8-32 x 3/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP16SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.47
$0.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 3/4 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • 8-32 Diameter, 3/4" Length
    • Pan head with Phillips Drive
    • 18-8 Stainless Material

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.63 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP16SS – Frequently Asked Questions

1) Is the JSPMP16SS screw sold individually or only as a full jar?
It comes packed in a jar, with an order minimum of 100 pieces. So you are buying a 100-count jar rather than loose screws.
2) Do these Metallics stainless screws meet Buy American or ARRA requirements for a public project?
No. The JSPMP16SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, this screw will not satisfy it.
3) What size Phillips bit do I need for these 8-32 pan head machine screws?
A #2 Phillips driver. The recess diameter is 0.175 in. with a gaging depth of 0.071 to 0.097 in., so a #2 seats properly; a #1 will cam out and a #3 will not sit in the recess.
4) Will the pan head sit flush enough under a cover plate or device yoke?
The pan head measures 0.306 to 0.322 in. across and 0.105 to 0.115 in. tall, built to ASME B18.6.3-2010. That is a low-profile head with a flat bearing underside, so it clears most cover plates and yokes. If you need the head fully buried in the material, use a flat head countersunk screw instead, not a pan head.
5) Are 18-8 stainless machine screws OK for damp or outdoor locations?
18-8 stainless is an austenitic chrome-nickel stainless and holds up in wet interior and general exterior exposure, which is why it is specified over zinc-plated steel for damp locations, wash-down areas and rooftop equipment. For salt spray or coastal exposure, 316 stainless is the step up.
6) How much load will an 8-32 stainless machine screw take?
Tensile strength is listed at 80,000 psi minimum, with hardness in the Rockwell B range. Metallics notes that tensile values for stainless screws are approximations, since there is no single performance standard for stainless machine screws. For structural or rated anchorage, use a fastener with a published grade marking instead.
7) Can I get the SPMP machine screws in other lengths or pack sizes?
Yes. Metallics offers the SPMP pan head Phillips machine screw line in other sizes and quantities by request; the JSPMP16SS is the 8-32 x 3/4 in. 18-8 stainless version in a 100-piece jar.
How fast can I get the Metallics JSPMP16SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP16SS come with a warranty?
Absolutely. The Metallics JSPMP16SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP16SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP16SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!