Metallics JSPMP17SS 6-32 x 3/8...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.27
$0.27
Metallics JSPMP17SS 6-32 x 3/8 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP17SS 6-32 x 3/8 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP17SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.27
$0.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 3/8 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Pan head with Phillips Drive
    • 18-8 Stainless Material
    • 6-32 Diameter, 3/8" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
8-Mar
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.26 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP17SS – Frequently Asked Questions

1) Are these stainless screws OK for outdoor or damp-location electrical work?
The material is 18-8 stainless, the austenitic grade normally specified where plated steel would rust, so it holds up in damp and exterior locations far better than zinc-plated hardware. Metallics lists the application as electrical, plumbing, heating and air conditioning work. For chloride-heavy coastal or pool environments, 316 stainless is the step up.
2) Will these qualify on a Buy American or ARRA-funded project?
No. The JSPMP17SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded job with domestic sourcing requirements you'll need a domestically produced fastener instead.
3) What size Phillips driver do I need for the Metallics JSPMP17SS screws?
A #2 Phillips. The recess is a Phillips drive with a 0.159 in. recess diameter and a gaging depth of 0.055 to 0.080 in., so a #2 bit seats fully. A #1 will cam out and chew the recess, which matters more on stainless than it does on plated steel.
4) How do these screws come packaged, and what is the minimum I can buy?
They ship in a jar of 100. The order minimum is one jar, so 100 pieces is the smallest quantity. Jar weight runs about 0.26 lbs.
5) How much does the pan head stand up off the surface, and how wide is it?
Head height is 0.087 to 0.097 in. and head diameter is 0.256 to 0.27 in. That low, broad profile is why pan heads work for holding device straps, cover plates and brackets where a round head would sit too proud or a flat head would need a countersink the part does not have.
6) Do these machine screws meet a recognized dimensional spec for submittals?
Dimensions conform to ASME B18.6.3-2010, the standard for inch-series machine screws, and the material is called out to SAE. Tensile strength is listed at 80,000 psi minimum, though Metallics notes stainless machine screw tensile values are approximations since there is no single performance standard for them.
7) Is a machine screw the right choice, or do I need a self-tapping screw?
A machine screw like the JSPMP17SS has a uniform 32 tpi thread with a blunt end and needs an existing tapped hole or a nut, which is exactly the case with device boxes, mounting straps and panel hardware. If you're driving into untapped sheet metal or a pilot hole only, a self-tapping or sheet metal screw is the correct part, not this one.
8) Can I get 6-32 pan head stainless screws in other lengths or pack sizes?
Yes. The SPMP series covers other sizes and quantities by request beyond the 3/8 in. length in the 100-count jar.
How fast can I get the Metallics JSPMP17SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP17SS come with a warranty?
Absolutely. The Metallics JSPMP17SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP17SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP17SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!