Metallics JFMP140SS 6-32 x 2-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.66
$0.66
Metallics JFMP140SS 6-32 x 2-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JFMP140SS 6-32 x 2-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFMP140SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.66
$0.66
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 2-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • Flat head with Phillips Drive
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • 6-32 Diameter, 2-1/2" Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.069 - 0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.238 - 0.262 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Gaging Diameter:
0.22
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.094
Phillips Recess Diameter:
0.168
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.34 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.021 - 0.036 Above
Sub Division:
Electrical-E H2
Tensile Strength:
550 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFMP140SS – Frequently Asked Questions

1) Do these qualify for a Buy American or ARRA-funded job?
No. The JFMP140SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic sourcing language, you will need a domestically produced fastener instead.
2) What size Phillips bit drives these screws without camming out?
Use a #2 Phillips. The recess is 0.168 in. in diameter, 0.094 in. deep and 0.029 in. wide, which is the geometry a #2 tip is cut for. A #1 will spin out in the bottom of the recess and a #3 will not seat.
3) Will the flat head sit flush in a countersunk hole, and how wide is the head?
Yes, the flat head is made to sit flush in an 82 degree countersink. Head width runs 0.238 to 0.262 in. and head height 0.069 to 0.083 in., so budget about a quarter inch of countersink diameter. Dimensions follow ASME B18.6.3-1998.
4) Are stainless machine screws the right choice for a damp or wash-down location, or should I use plated steel?
18-8 stainless is the choice where you need general atmospheric corrosion resistance, which covers outdoor enclosures, refrigeration equipment and food processing machinery. Plated steel is fine for dry interior work and nothing more. Stainless also holds strength better than steel when the application runs warm.
5) Do these Metallics screws come loose or in a pack, and what is the minimum order?
They ship in a jar of 100, and the jar is the order minimum. Not sold as singles.
How fast can I get the Metallics JFMP140SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP140SS come with a warranty?
Absolutely. The Metallics JFMP140SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP140SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP140SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!