Metallics JDWS2MD 6 x 11/8 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.11
$0.11
Metallics JDWS2MD 6 x 11/8 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 1000qty

Metallics JDWS2MD 6 x 11/8 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - Each

(No reviews yet) Write a Review

Model: JDWS2MD
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.11
$0.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 11/8 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 1000qty

  • Features

    • Made in the USA
    • Steel Black Phosphate Material
    • 6 Diameter, 11/8" Length
    • Bugle Head with Phillips Drive
    • Fine Threads

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for drywall screw dimensions. These values are offered as a guide;deviations from these specifications may occur.

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Country Of Origin:
United States
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.031 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.347 in.
Fastener Length:
1/1/08
Hardness:
Rockwell C44
Language Code:
EN
Material Standard:
AISI 1018
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Fine_Thrd_Dry_Scr_Blk_Phos.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Phillips Recess Depth:
0.106
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
3.8 lbs
Product Width:
4.5 in
Screw Point Type:
Sharp Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Spacing:
Fine
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Drywall Screw
Type2:
Drywall Screw
Series:
DWS
Product Finish:
Black Phosphate
Product Details:
Drywall Screw
Product Material:
Steel Black Phosphate

Metallics JDWS2MD – Frequently Asked Questions

1) Are the Metallics JDWS2MD fine thread drywall screws for wood studs or metal studs?
Metal studs. The JDWS2MD is a fine thread screw at 18 threads per inch with a sharp point, which is the combination used for fastening drywall to light gauge steel framing. For wood studs you want a coarse thread drywall screw instead, since coarse threads bite into wood and fine threads will strip in it.
2) Do these Metallics drywall screws qualify for Buy American on a federal job?
Yes. The JDWS2MD screws are made in the United States and flagged both Buy American compliant and ARRA compliant, which is what a government or institutional procurement file usually needs on fasteners.
3) Is black phosphate drywall screw okay for exterior or damp areas?
No. Black phosphate is a dry interior finish only; it offers very little corrosion protection and will rust in wet or exterior conditions. Use these JDWS2MD screws for interior board hanging, and move to a coated or galvanized exterior screw for soffits, sheathing, or damp locations.
4) What size Phillips bit do I need for Metallics JDWS2MD drywall screws?
A #2 Phillips. The bugle head carries a Phillips recess 0.176 to 0.201 inches across and 0.106 inches deep, so a #2 driver seats properly and keeps cam-out down on a screw gun.
5) How many drywall screws come in a jar of Metallics JDWS2MD?
They ship in jars of 1,000, which is the order minimum. The jar runs about 3.8 lbs.
6) Will the heads of these screws sit flush and take joint compound?
The bugle head is made for that. Head width runs 0.315 to 0.347 inches with a head height of 0.020 to 0.031 inches, so the tapered underside pulls the paper face into a shallow dimple without tearing it, and the dimple fills with compound. Set the depth stop on your screw gun rather than driving by feel.
7) How hard are Metallics JDWS2MD screws, and will they snap in 25 gauge steel track?
They are hardened to Rockwell C44 from AISI 1018 steel, which is the normal case hardened range for a drywall screw and is what lets the sharp point pierce light gauge steel track without the shank twisting off. Note they are sharp point, not self drilling, so heavier gauge structural studs call for a self drilling point instead.
How fast can I get the Metallics JDWS2MD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDWS2MD come with a warranty?
Absolutely. The Metallics JDWS2MD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDWS2MD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDWS2MD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!