Metallics JFWP10M 6 x 3/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JFWP10M 6 x 3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 1000qty

Metallics JFWP10M 6 x 3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP10M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 1000qty

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 6 Diameter, 3/4" Length
    • Flat Head with Phillips Drive
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
4-Mar
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.53 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP10M – Frequently Asked Questions

1) Are these Metallics wood screws OK for exterior or damp locations?
These are zinc plated steel. Zinc plating handles indoor and protected use, but it is not a stainless or hot dip galvanized finish, so it is not the right choice for sustained exterior exposure, treated lumber, or wet locations. For those, specify a stainless flat head wood screw in the same #6 x 3/4 size.
2) Is the Metallics JFWP10M sold loose or by the box, and what is the minimum I can buy?
It ships as a jar of 1,000 screws, and 1,000 is the order minimum. Shipping weight on the jar is 2.53 lbs. If you need a count smaller than a thousand of the #6 x 3/4, this is not the pack to order.
3) What driver bit do I need for Metallics JFWP10M #6 wood screws?
A #2 Phillips bit. The JFWP10M has a Phillips recess with a 0.161 to 0.174 inch recess diameter and 0.083 to 0.106 inch recess depth, which is what a #2 driver seats into. A #1 bit will cam out and chew the recess on a #6 head.
4) Do Metallics JFWP wood screws meet a published dimensional standard for spec jobs?
They are built to ASME B18.6.1, with the thread conforming to ASME B18.6.1-1997. That is the standard a submittal calling for a conforming flat head Phillips wood screw is referencing, so the head, recess, and thread dimensions are all traceable rather than generic.
5) Do these screws qualify for Buy American or ARRA funded work?
The JFWP10M is flagged Buy American compliant and ARRA compliant in the product record, with country of origin China. On federally funded jobs, confirm which compliance clause your contract actually invokes, since Buy American coverage for fasteners is treated differently than domestic melt and manufacture requirements.
6) Is the thread full length on a 3/4 inch wood screw, or only partial?
On the short lengths the thread runs as close to the underside of the head as is practical, so a 3/4 inch #6 is effectively threaded its full working length. Partial threading starts to apply at longer sizes, where the thread covers roughly two thirds of the length from 1 inch up. For pulling two pieces of wood tight you want that shank clearance in the top piece drilled out, since there is no unthreaded shank here to do it for you.
How fast can I get the Metallics JFWP10M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP10M come with a warranty?
Absolutely. The Metallics JFWP10M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP10M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP10M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!