Metallics JFWP10 6 x 3/4 in. F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.16
$0.16
Metallics JFWP10 6 x 3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP10 6 x 3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP10
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.16
$0.16
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Steel Zinc Material
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 6 Diameter, 3/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.28 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP10 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWP10 wood screws?
The JFWP10 ships 100 screws to a jar, and the jar is the order minimum. If you need a different count or a different size in the same flat head Phillips wood screw family, other sizes and quantities are available by request.
2) What size Phillips driver do I need for a #6 x 3/4 in. Metallics wood screw?
A #2 Phillips. The recess is 0.161 to 0.174 in. diameter with a 0.083 to 0.106 in. depth, so a #2 bit seats fully; a #1 will cam out and chew the recess on hardwood.
3) Will these screws satisfy a Buy American or ARRA requirement on a federal job?
No. The JFWP10 is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. If your contract carries a domestic sourcing clause, these will not clear it.
4) Can I use these zinc plated wood screws outdoors or in a damp location?
These are steel with a zinc plating, which is for dry interior work. Zinc plate gives light corrosion resistance only, so for exterior boxes, wet locations, or treated lumber go to a stainless steel flat head wood screw instead.
5) Do these wood screws need a pilot hole in hardwood?
They have a tapered point and 18 threads per inch, which lets them start in softwood framing without a pilot. In oak, maple, or near the end of a board, drill a pilot anyway, the #6 shank will split hardwood.
6) Are these Metallics wood screws made to a dimensional standard?
Yes, head, recess, and thread dimensions follow ASME B18.6.1, with the thread specifically to ASME B18.6.1-1997. That matters on spec jobs where a submittal calls out a standard rather than a brand.
7) How much does a jar of 100 Metallics JFWP10 screws weigh for shipping or a service truck?
About 0.28 lbs for the jar of 100. Light enough that a few sizes of this series can live in a van bin without weighing anything down.
How fast can I get the Metallics JFWP10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP10 come with a warranty?
Absolutely. The Metallics JFWP10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!