Metallics JRM87SLT 8-32 x 1-1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JRM87SLT 8-32 x 1-1/4 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM87SLT 8-32 x 1-1/4 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM87SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1-1/4 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Steel Zinc Material
    • Round head with slotted Drive
    • 8-32 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.107 - 0.12 in.
Fastener Head Type:
Round
Fastener Head Width:
0.287 - 0.309 in.
Fastener Length:
1/1/04
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.73 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.064 - 0.090
Slot Depth:
0.058 - 0.077
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM87SLT – Frequently Asked Questions

1) Do these screws meet Buy American or ARRA requirements for a public works job?
The JRM87SLT is flagged as both ARRA compliant and Buy American compliant in the manufacturer's data, with country of origin listed as China. On a federally funded project where the specification requires domestic melt and manufacture rather than the broader compliance flag, confirm which standard your spec is written to before you submit these.
2) How many screws come in a pack of these Metallics 8-32 round head screws?
They ship in a jar of 100 pieces, and 100 count is the order minimum. The filled jar weighs 0.73 lbs.
3) How much clearance does the round head need over the surface?
The round head measures 0.287 to 0.309 in. across and stands 0.107 to 0.12 in. tall, so figure on about an eighth of an inch of head projection above the work. Round heads are domed and bear on the surface rather than drawing flush, so if you need the screw to sit flat in a countersunk hole this is the wrong head style.
4) Are these steel zinc screws strong enough for structural or load-bearing fastening?
These are low carbon steel screws, AISI 1006 to 1022, with 60,000 psi minimum tensile strength and Rockwell B70 to B100 hardness. That is standard commercial machine screw strength, fine for mounting devices, plates, brackets, and enclosure hardware. For a graded structural connection you want a Grade 5 or Grade 8 cap screw instead, not a low carbon machine screw.
5) Can I use these Metallics zinc screws outdoors or in a damp location?
The finish is zinc plating over steel, which handles indoor and dry locations well but is only a sacrificial coating. In wet, coastal, or washdown areas it will eventually rust through. Use a stainless machine screw in the same 8-32 x 1-1/4 size for those spots.
6) Is the JRM87SLT a blunt machine screw thread or a self-tapping screw?
It is a straight machine screw: a uniform 8-32 thread, 32 TPI, meant to go into a pre-tapped hole or to be paired with a nut. It will not cut its own thread in sheet metal or plastic. For that you want a self-tapping or sheet metal screw.
7) What is the exact part number to order the 8-32 x 1-1/4 in. round head slotted screw from Metallics?
Order Metallics part JRM87SLT, from the JRM series. That number covers the 8-32 x 1-1/4 in. round head slotted machine screw in zinc plated steel, packed 100 to a jar.
How fast can I get the Metallics JRM87SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM87SLT come with a warranty?
Absolutely. The Metallics JRM87SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM87SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM87SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!