90250 Viega MegaPress adapter Smart Connect technology 316 stainless steel, 1-1/2'' x 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P x MPT
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1-1/2'' x 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Adapters
- Product Type:
- Adapter
- Product Length:
- 3.831"
- Product Height:
- 2.165"
- Product Weight:
- 0.983 lbs
- Product Width:
- 2.362"
- Product Material:
- 316 stainless steel
Viega 90250 – Frequently Asked Questions
1) What kind of connection does the Viega MegaPress 90250 have on each end?
The 90250 is a press by male thread adapter: one end is a 1-1/2 inch MegaPress press connection that goes onto the pipe with a press tool, the other is 1-1/2 inch male pipe thread (MPT) for a threaded mate. So it is the transition piece when you need to get from pressed pipe into a threaded valve, union, gauge port, or equipment connection.
2) Is the Viega 90250 MegaPress fitting stainless or carbon steel?
It is 316 stainless steel, not carbon. That matters on the job because 316 is the grade you pick for corrosive or wash-down environments and for systems where a carbon steel MegaPress fitting would not hold up. If your run is black iron carbon steel pipe, the carbon steel MegaPress line is the matching product; the 90250 is the stainless version.
3) Will the Viega 90250 thread into a female 1-1/2 inch NPT port?
Yes. The threaded end is 1-1/2 inch male pipe thread, so it screws into any 1-1/2 inch female NPT port, valve, or threaded coupling. Seal it with tape or pipe dope as you would any threaded joint; the press end is sealed by the fitting's own seal when pressed and takes no sealant.
4) What does Smart Connect mean on a Viega MegaPress fitting?
Smart Connect is Viega's unpressed-joint feature: a fitting that has been left unpressed will leak visibly during pressure testing so the installer can find it before the system is closed up. On a 1-1/2 inch adapter like the 90250 that is the difference between catching a missed press at test and chasing it after the ceiling is up.
5) Do I need a special press tool and jaw for a 1-1/2 inch MegaPress fitting?
The press end of the 90250 is a 1-1/2 inch MegaPress connection, so it needs a press tool with the MegaPress jaw or ring sized for 1-1/2 inch. Copper press jaws are not interchangeable with MegaPress. Order the correct 1-1/2 inch MegaPress jaw or ring and actuator with the fitting if you do not already run that size.
6) Is the Viega 90250 made in the USA?
No. The 90250 MegaPress adapter is made in Germany. If your project carries a domestic-sourcing requirement, that is the detail to check against the spec before it goes on the submittal.
How fast can I get the Viega 90250 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90250 come with a warranty?
Absolutely. The Viega 90250 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90250?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90250 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.