You may also like
90275 Viega MegaPress adapter Smart Connect technology 316 stainless steel, 1-1/2'' x 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FPT
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1-1/2'' x 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Adapters
- Product Type:
- Tee
- Product Length:
- 3.319"
- Product Height:
- 2.165"
- Product Weight:
- 0.893 lbs
- Product Width:
- 2.362"
- Product Material:
- 316 stainless steel
Viega 90275 – Frequently Asked Questions
1) What connections does the Viega 90275 MegaPress adapter have on each end?
The Viega 90275 is a press by female pipe thread adapter, 1-1/2 inch on both ends. The press end goes onto 1-1/2 inch pipe with a MegaPress jaw and the other end takes a male-threaded 1-1/2 inch NPT fitting or nipple, so you can transition from a pressed run into threaded equipment, valves, or unions without welding.
2) Is the Viega 90275 MegaPress adapter stainless or carbon steel?
It is 316 stainless steel, not carbon steel. That matters on two counts: 316 holds up better where there is moisture, washdown, or mildly corrosive media, and it also means the fitting should be matched to stainless pipe and sealants appropriate to stainless rather than used as a straight stand-in for a black iron fitting.
3) Can I use the Viega 90275 to tie a pressed line into a threaded gauge, valve, or pump connection?
That is exactly what the female-thread end is for. The 1-1/2 inch FPT side accepts male 1-1/2 inch NPT threads on a valve, nipple, gauge tee, or equipment stub, while the press side ties back into 1-1/2 inch pipe. For maintenance crews it means the threaded device can be broken out later without disturbing the pressed run.
4) Does the Viega 90275 adapter have Smart Connect, and what does that actually do for me on the job?
Yes, the 90275 carries Viega's Smart Connect feature. Its purpose is to let an unpressed connection leak visibly during pressure testing, so an installer walking a riser can spot a joint that was missed before the system is put into service. It does not replace pressing the joint, it only makes the mistake obvious.
5) How much room do I need around the Viega 90275 to press it in a tight chase?
The adapter itself measures 3.319 inches long, 2.362 inches wide and 2.165 inches high, and weighs 0.893 lbs. Plan clearance beyond that for the press jaw to swing fully around the press end, since the tool, not the fitting, drives how tight a space you can work in.
6) Where is the Viega 90275 MegaPress fitting manufactured?
It is made in Germany. Procurement teams that have to document country of origin on submittals or government work can list it as such.
How fast can I get the Viega 90275 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90275 come with a warranty?
Absolutely. The Viega 90275 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90275?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90275 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.