You may also like
91885 Viega MegaPress tee Smart Connect technology 316 stainless steel, 1-1/2'' x 1-1/2'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.953"
- Product Height:
- 2.437"
- Product Weight:
- 1.549 lbs
- Product Width:
- 3.185"
- Product Material:
- 316 stainless steel
Viega 91885 – Frequently Asked Questions
1) What are the three connections on the Viega MegaPress 91885 tee?
The 91885 MegaPress tee runs 1-1/2 inch press on both run ends and branches to a 3/4 inch female pipe thread. Viega lists the configuration as P1 x P2 x FPT, so the two press ends go onto 1-1/2 inch pipe and the threaded branch takes a 3/4 inch male-threaded nipple, valve, or gauge adapter.
2) Can I use the 91885 MegaPress tee to take a branch off a 1-1/2 inch black iron line without threading or welding?
Yes. Both 1-1/2 inch ends of this tee are MegaPress press connections, so they go onto existing 1-1/2 inch pipe with a press tool rather than cut threads or a weld. The 3/4 inch branch is female thread, which is how you pick up a gauge, drain, or small takeoff on that line.
3) Is the Viega 91885 tee stainless or carbon steel?
It is 316 stainless steel, body and all. That matters when you are branching a line carrying something corrosive or installing in a wet or washdown area where a carbon steel MegaPress fitting would not be the right call.
4) How much room do I need to fit the 91885 MegaPress tee between hangers?
Plan for roughly 6.953 inches of length, 3.185 inches of width and 2.437 inches of height around the fitting. In a tight joist bay or against a wall, remember the press jaw needs clearance around the collar beyond the fitting body itself.
5) What does Smart Connect do on this Viega MegaPress tee?
Smart Connect is Viega's feature that leaves a deliberate leak path at an unpressed connection, so when you fill and pressure test, any joint you missed shows itself instead of hiding until the system is in service. On a three-way fitting like this 1-1/2 x 1-1/2 x 3/4 tee that is useful, since both press ends have to be made up and one is easy to skip.
6) How much does the Viega 91885 MegaPress tee weigh?
About 1.549 lbs. Light enough to hang off the line while you set the press tool, but on a 1-1/2 inch stainless run you still want support near the fitting rather than letting the tee and whatever hangs off the 3/4 inch branch carry the load.
How fast can I get the Viega 91885 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91885 come with a warranty?
Absolutely. The Viega 91885 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91885?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91885 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.