You may also like
95005 Viega MegaPress 90° elbow Smart Connect technology 304 stainless steel, 1/2'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 1/2'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° Elbow
- Product Length:
- 2.874"
- Product Height:
- 1.264"
- Product Weight:
- 0.324 lbs
- Product Width:
- 2.874"
- Product Material:
- 304 stainless steel
Viega 95005 – Frequently Asked Questions
1) What size pipe does the Viega MegaPress 95005 elbow fit?
The 95005 is a 1/2 inch x 1/2 inch 90 degree elbow, press on both ends. It's made for 1/2 inch carbon steel pipe, so both outlets take the same size, no reducing.
2) Do I need to thread or weld pipe to use this Viega 90 degree elbow?
No. Both ends are press connections (P1 x P2), so the joint is made cold with a MegaPress press tool and jaw. No threading, no cutting oil, no torch or hot work permit. You still need to cut the pipe square, deburr it, and mark insertion depth before pressing.
3) Is the Viega 95005 elbow stainless or carbon steel body?
The body is 304 stainless steel. That matters on jobs where the spec calls out stainless fittings, and it's the reason this elbow holds up better than a plain carbon fitting in damp mechanical rooms.
4) How do I know a MegaPress joint actually got pressed?
The 95005 uses Viega's Smart Connect feature. An unpressed fitting leaks visibly during pressure test, so you find the missed joint before the walls close instead of after. Walk the run under test pressure and look for weeping at each elbow.
5) How much space do I need to fit this 1/2 inch press elbow in a tight chase?
The fitting itself measures 2.874 inches long by 2.874 inches wide with a height of 1.264 inches, and it weighs 0.324 lbs. Allow clearance beyond that for the press jaw to wrap the fitting square to the pipe, which is usually the real constraint in a tight chase rather than the fitting body.
6) Can I use one MegaPress elbow to join two different pipe sizes?
Not with the 95005. It's 1/2 inch on both ends, so it only turns a corner, it does not transition size. For a size change you need a reducing fitting or a reducing coupling in the MegaPress line.
How fast can I get the Viega 95005 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95005 come with a warranty?
Absolutely. The Viega 95005 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95005?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95005 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.