You may also like
95360 Viega MegaPress reducer Smart Connect technology 304 stainless steel, 1'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FTG
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 1'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 3.24"
- Product Height:
- 1.315"
- Product Weight:
- 0.347 lbs
- Product Width:
- 1.315"
- Product Material:
- 304 stainless steel
Viega 95360 – Frequently Asked Questions
1) What do the two sizes on the Viega MegaPress 95360 reducer mean, and which end is which?
The Viega 95360 MegaPress reducer is a 1 inch x 1/2 inch fitting with a P x FTG connection: one end is a press socket (P) that accepts the pipe, and the other is a fitting-end (FTG) sized to slip into the next press socket downstream. So it steps a 1 inch run down to 1/2 inch without needing an extra coupling at the FTG end.
2) Is the Viega 95360 MegaPress fitting carbon steel or stainless?
It is 304 stainless steel, not carbon steel. That matters when you are matching an existing MegaPress run, since MegaPress carbon steel and MegaPressG fittings are a different material family. Use the 95360 where the system calls for stainless.
3) What is Smart Connect on the Viega MegaPress 95360 reducer and why would an inspector care?
Smart Connect is a feature of the press socket that intentionally leaks slightly when the joint has not been pressed. On a 1 inch x 1/2 inch 95360 reducer that gives you a visible way to find an unpressed connection during pressure test instead of discovering it after the wall is closed.
4) How much room do I need to fit the Viega 95360 reducer between hangers or in a tight chase?
Plan for 3.24 inches of length and a 1.315 inch body height and width on the 95360 reducer. Add clearance beyond that for the press jaw to close squarely around the socket, which is usually the real constraint in a tight chase rather than the fitting itself.
5) Do I need anything else besides the Viega 95360 reducer to make the joint?
The reducer ships as the fitting only, with the sealing element already in the press socket. You still need a press tool with the correct MegaPress jaw or ring for the socket size, and the FTG end has to land inside a matching 1/2 inch press socket on the next fitting. No solder, threading, or separate gasket is involved.
6) What part number do I order for a 1 inch to 1/2 inch stainless MegaPress reducer?
Viega part 95360. It is a single-configuration item, so there are no finish or option choices to specify, just the 1 inch x 1/2 inch 304 stainless reducer with a P x FTG connection.
How fast can I get the Viega 95360 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95360 come with a warranty?
Absolutely. The Viega 95360 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95360?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95360 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.