95795 Viega MegaPress tee Smart Connect technology 304 stainless steel, 1-1/4" x 1-1/4" x 1-1/4"
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 1-1/4" x 1-1/4" x 1-1/4"
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.535"
- Product Height:
- 2.205"
- Product Weight:
- 1.578 lbs
- Product Width:
- 4.343"
- Product Material:
- 304 stainless steel
Viega 95795 – Frequently Asked Questions
1) What pipe size does the Viega MegaPress 95795 tee fit?
The Viega 95795 MegaPress tee is a 1-1/4 inch equal tee, 1-1/4" x 1-1/4" x 1-1/4" on all three press ends. All three outlets are press connections (P1 x P2 x P3), so there is no threaded or sweat branch on this fitting.
2) Is the Viega 95795 MegaPress tee made of stainless or carbon steel?
It is 304 stainless steel, body and all three press ends. That matters when you are choosing between the carbon steel MegaPress line and the stainless MegaPressG/stainless line: 304 is the one to spec where the carbon steel version would be a corrosion risk for the media or the environment.
3) What is Smart Connect on a Viega MegaPress fitting and why does a contractor care?
Smart Connect is the feature built into the 95795 tee that leaves an unpressed connection deliberately leaking during pressure test, so a joint you missed shows itself before the walls close up. On a run with a lot of tees it is the fastest way to find the one connection the tool never got on.
4) How much room do I need to fit a 1-1/4 inch MegaPress tee between joists or in a tight chase?
Plan around a fitting that measures 6.535 inches long, 4.343 inches wide and 2.205 inches high, and add clearance for the press jaw or ring to swing around each end. The jaw, not the fitting, is usually what decides whether a tight chase works.
5) Does the Viega 95795 tee need any solvent, flame or thread sealant to install?
No. It is a press fitting on all three outlets, so it goes on with a press tool and the correct jaw for 1-1/4 inch. No torch, no flux, no dope, no cut threads. That is the main reason crews pick it for occupied buildings where a hot work permit is a problem.
6) What part number do I order for a 1-1/4 inch stainless MegaPress tee?
Viega part number 95795. One model, one configuration: 1-1/4 inch equal tee in 304 stainless with press ends on all three sides. There are no finish or size options to pick on this one.
7) How much does the Viega 95795 MegaPress tee weigh for a materials takeoff?
1.578 lbs each. For a bulk order, multiply that by your tee count when you are figuring freight or what a cart can carry to the floor.
8) Where is the Viega 95795 MegaPress tee manufactured?
Made in Germany. Institutional and government buyers working to a country-of-origin requirement should check that against their procurement rules before specifying it.
How fast can I get the Viega 95795 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95795 come with a warranty?
Absolutely. The Viega 95795 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95795?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95795 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.