95855 Viega MegaPress tee Smart Connect technology 304 stainless steel, 1-1/4'' x 1-1/4'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 1-1/4'' x 1-1/4'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.535"
- Product Height:
- 2.205"
- Product Weight:
- 1.3 lbs
- Product Width:
- 3.52"
- Product Material:
- 304 stainless steel
Viega 95855 – Frequently Asked Questions
1) What size branch does the Viega MegaPress 95855 tee reduce to?
The 95855 MegaPress tee runs 1-1/4 inch on both ends of the run with a 1/2 inch press branch. So you keep full 1-1/4 inch flow through the main and take a reduced 1/2 inch tap off the side, which is the usual arrangement for a gauge port, drain, small drop or an instrument connection off a larger header.
2) Are all three outlets on this Viega tee press connections, or is the branch threaded?
All three are press. The connection type is P1 x P2 x P3, meaning press on the 1-1/4 inch run ends and press on the 1/2 inch branch. If you need to land a threaded device on the branch, you have to press a separate adapter fitting onto that 1/2 inch outlet.
3) Is the Viega 95855 MegaPress tee stainless or carbon steel?
It is 304 stainless steel. That matters when you are choosing between MegaPress lines: the stainless body is the one specified where the carbon steel version would be at risk, and it is built in Germany.
4) What does Smart Connect mean on a MegaPress fitting and do I still have to press every joint?
Smart Connect is Viega's unpressed-joint feature: an unpressed fitting leaks visibly during pressure test so it gets found before the system is charged. It is a detection aid, not a substitute for pressing. Every one of the three outlets on the 95855 has to be pressed with the correct jaw or ring for its size, 1-1/4 inch on the run and 1/2 inch on the branch.
5) Should I use a reducing press tee like this or a full-size tee with a bushing?
Use the reducing tee. The 95855 gives you the 1/2 inch branch built into the body, so it is one fitting and three presses instead of a 1-1/4 inch tee plus a reducer and an extra joint. Fewer joints means fewer places to miss a press. Go to a full-size 1-1/4 inch tee only when the branch actually needs to carry 1-1/4 inch flow.
How fast can I get the Viega 95855 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95855 come with a warranty?
Absolutely. The Viega 95855 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95855?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95855 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.