American Standard Institutional 1.5 gpm/5.7 Lpf Showerhead - AMS-1660244

Yes. Model 1660244.002 has a pressure-compensating flow control device built in, so the maximum flow stays at 1.5 gpm (5.7 Lpm) rather than climbing with higher supply pressure. That is what makes it usable in a multi-story building where pressure varies floor to floor.

That is what it is built for. The American Standard 1660244 is an institutional head with solid brass construction and vandal-resistant mounting, so it resists the tampering and rough handling you get in dorms, barracks, locker rooms, and detention shower rooms. Plastic-bodied residential heads do not hold up in the same service.

Its maximum flow rate is 1.5 gpm (5.7 Lpm), and the pressure-compensating control keeps it there instead of allowing overflow at higher pressures. If your retrofit spec calls for a head at or below 1.5 gpm, this one meets that number.

It is a fixed wall showerhead with vandal-resistant mounting, not a handheld on a hose. If your opening needs an ADA-style handheld with a slide bar and flexible hose, this is the wrong item for that application.

Durability under abuse and constant use. The 1660244 is solid brass with vandal-resistant mounting, so the body will not crack and the head is not easily twisted off or stolen. In a private residence a plastic head is fine; in an MRO or multi-family setting where the head gets handled by dozens of people a day, brass is the reason the replacement cycle drops.

Chrome, ordered as part number 1660244.002. That is the only finish offered, which keeps it easy to standardize across a whole facility when you are replacing heads building-wide.