American Standard Washbrook Ur...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$807.00
American Standard Washbrook Urinal System With Touchless Selectronic Piston Flush Valve, 1.0 gpf/3.8 Lpf - AMS-6501610

American Standard Washbrook Urinal System With Touchless Selectronic Piston Flush Valve, 1.0 gpf/3.8 Lpf - AMS-6501610

(No reviews yet) Write a Review

Model: 6501610.02

In Stock (leaves warehouse same day if ordered before 3pm ET)

$807.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Washbrook Urinal System With Touchless Selectronic Piston Flush Valve, 1.0 gpf/3.8 Lpf
  • Vitreous china construction
  • Powerful washdown flushing action
  • Extended side for privacy 
  • 3/4" (19 mm) inlet spud with 2" (51 mm) outlet connection
  • Wall hangers included
  • Touchless piston-operated flush valve
  • 8-year CR-P2 lithium battery installed in valve
  • Exclusive DynaClean self-cleaning wiper spring technology
  • Integral wiper spring cleans refill orifice with every flush to help prevent valve run-on
  • Fully mechanical manual override can operate without power

Manufacturer Resources

Product Specs

Product Type:
Flush Valve
Product Group:
Commercial
Product Subgroup:
Parts and Accessories
Department:
Plumbing
Parts and Accessories Type:
Flush Valve
Application:
Toilet

American Standard 6501610.02 – Frequently Asked Questions

1) What size supply and outlet connections does the American Standard Washbrook urinal system use?
The Washbrook urinal takes a 3/4 inch (19 mm) inlet spud and has a 2 inch (51 mm) outlet connection. If your rough-in was built for a 1-1/4 inch top spud urinal, this is not a drop-in swap, the 3/4 inch spud is the larger commercial flush valve connection.
2) Does the Washbrook touchless urinal flush valve need to be hardwired or have power run to it?
No electrical rough-in needed. The Selectronic piston valve ships with an 8-year CR-P2 lithium battery already installed in the valve, so it runs on battery power alone. That makes it workable in an existing restroom where there's no power at the fixture.
3) What happens if the battery dies on the touchless urinal valve, can it still be flushed?
It can. The valve has a fully mechanical manual override that operates without power, so staff can keep the fixture in service until the CR-P2 lithium battery is swapped. For a facility maintenance crew that's the difference between a dead urinal and a minor service call.
4) Is the Washbrook urinal a low flow 1.0 gpf fixture?
Yes, it flushes at 1.0 gpf / 3.8 Lpf using washdown flushing action. That puts it below the 1.5 gpf and older 1.0-plus urinals many buildings still run, which is what facilities standardizing on lower consumption fixtures are usually after.
5) Does the Washbrook urinal come with mounting hardware, or do I need to order carriers separately?
Wall hangers are included with the vitreous china urinal. The valve comes as part of the system too, so you are buying the fixture and the touchless piston flush valve together rather than speccing them separately. Supply stop, escutcheon and the waste connection are the usual site-supplied items on a job like this.
6) Why do touchless urinal valves run on and waste water, and does this one address that?
Run-on usually starts when debris fouls the refill orifice in the valve. The Washbrook's Selectronic piston valve uses DynaClean self-cleaning wiper spring technology, an integral wiper spring that cleans the refill orifice on every flush to help prevent run-on. For high traffic restrooms with dirty water that's the failure mode you're trying to design out.
7) Does the Washbrook urinal offer any privacy shielding, or do I need separate partitions?
The china has an extended side that gives some privacy between adjacent fixtures. It does not replace partitions where your local code or the owner's standard calls for them, but it does reduce splash and sightlines in a tight bank of urinals.
8) What finish does the Washbrook urinal system come in, and what is the model number?
It's sold in white only, model 6501610.02, in vitreous china. If you are matching a restroom where the other fixtures are white china, that's the one finish offered.
How fast can I get the American Standard 6501610.02 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 6501610.02 come with a warranty?
Absolutely. The American Standard 6501610.02 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 6501610.02?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the American Standard 6501610.02 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!