Recessed Paper Towel Dispenser/Waste Receptacle
Satin-finish stainless steel. Seamless beveled flange. Dispenses 350 C-fold or 475 multifold towels. Knob-latch retains door. Removable waste container has 2-gal. (7.6-L) capacity. Rough Wall Opening: 12 5/8″ W, 26 5/8″ H, 4″ min. depth (320 x 675 x 100mm).
Features
- Stainless steel, satin finish
- Recessed Mount
- 14″ W x 28″ H x 4-1/8″ D
- Dispenses 350 C-fold or 475 half-fold toilet seat cover
- Removable 2 gal. waste container
Product Specs
- Finish : Satin-Finish Stainless Steel
- Operation : Manual
- Mounting Options : Recessed Mounted
- Paper Type : Multi-Fold Towel
- Towel Capacity : 350 C-fold; 475 multifold
- Waste Capacity : 2-gal. (7.6-L)
- Accessibility : ADA Compliant
Resources
Manufacturer Resources
Product Specs
- Capacity:
- 350 - 475 Towels
- Dispenser Type:
- C-Fold - M-Fold
- Product Type:
- Trash Cans
- Waste Capacity:
- 2 Gallons
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Waste Receptacle
- Product Material:
- Stainless Steel
- Department:
- Plumbing
Bobrick 369 – Frequently Asked Questions
1) Is the waste bin on the B-369 big enough for a busy public restroom?
The removable waste container is 2 gallons (7.6 L). That is sized for a low to moderate traffic washroom, a single-fixture office or retail restroom, or as a supplement near a secondary lavatory. In a high-traffic facility, an airport, stadium, or school corridor restroom, a 2 gallon bin will need emptying multiple times a day and you would be better served pairing it with a larger floor or recessed receptacle.
2) Is the Bobrick B-369 ADA compliant?
Bobrick lists the B-369 as ADA compliant. Compliance still depends on how you set it in the wall: the dispensing point and the waste opening have to land within the reach ranges for the intended user group, so the mounting height off the finished floor is what your inspector will check. Mount it so the operable parts fall inside the reach range required for that restroom.
3) How many paper towels does the Bobrick B-369 hold, and what fold does it take?
It holds 350 C-fold or 475 multifold towels. The dispenser is set up for both C-fold and multifold stock, so a facility already buying either fold can keep its current towel contract. For a restroom that burns through towels fast, multifold gets you about a third more per fill.
4) What is the B-369 made of and will it hold up in a public washroom?
Stainless steel with a satin finish throughout, including a seamless beveled flange at the wall line. Satin stainless hides fingerprints and scratching better than a mirror finish, and the seamless flange means there is no welded joint at the perimeter to collect grime or to crack. That combination is why this unit shows up in school, hospital, and transit restroom specs.
5) Should I use a recessed unit like the B-369 or a surface-mounted towel dispenser and waste bin?
Recessed is the right call when you need to keep the fixture out of the clear floor and circulation path, which matters in tight restrooms and accessible stalls, and when you want a finished, tamper-resistant look. It costs you wall depth: you need a 4 inch minimum cavity and the opening has to be cut and framed, which is straightforward in new construction or a gut remodel but awkward in a retrofit against a block or shear wall. If you cannot open the wall, go surface mounted or semi-recessed instead.
6) How is the B-369 serviced, and does the door lock?
The door is retained by a knob latch, so an attendant opens it by hand with no key or tool. The waste container lifts out for emptying rather than being emptied in place. That speeds up a housekeeping route, but understand what the knob latch is: it retains the door, it is not a secured lock, so it is not the right choice for a restroom with a vandalism problem or one where you need controlled access to the consumables.
7) Does the Bobrick B-369 come in any finish other than satin stainless?
Satin stainless is the only finish offered on the B-369. If you are matching a run of restrooms, that works in your favor: every unit ordered will be the same satin stainless, so replacements and additions years apart still match what is already on the wall.
8) Is the B-369 a manual dispenser or does it have a sensor?
Manual. The user pulls a towel from the dispensing slot, with no sensor, batteries, or power to run to the wall. For a property manager that means no electrical rough-in at the fixture and nothing to fail or need battery service down the line.
How fast can I get the Bobrick 369 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 369 come with a warranty?
Absolutely. The Bobrick 369 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 369?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 369 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.