You may also like
SATCO Lighting S11568 10.5W, LED Retrofit Downlight, 4in Round, Starfish IOT, RGB & Tunable White, 120V, 90 CRI, White Finish
10.5 Watt - LED Retrofit Downlight - 4 Inch Round - Starfish IOT - RGB & Tunable White - 120 Volt - 90 CRI - White Finish
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 50000
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Integrated
- Lamp Shape:
- Integrated LED
- Lumens:
- 650L
- Operating Frequency:
- 60Hz
- Product Type:
- Downlight Retrofit
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cETLus
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- No
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11568/S11568_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11568.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 2000K-5000K
- Product Diameter:
- 5"
- Product Dimension:
- H:2.71" DIA:5.00"
- Mounting Method:
- Recessed Retrofit
- Product Shape:
- Round
- Product Style:
- Utility
- Product Height:
- 2.71"
- Product Category:
- Fixtures
- Product Wattage:
- 10.5W
- Product Material:
- Aluminum
- Product Weight:
- 0.35 lb
- Product Width:
- 5 in
Satco Lighting S11568 – Frequently Asked Questions
1) Will the Satco S11568 retrofit downlight fit a 4 inch recessed can?
Yes, it is a 4 inch round retrofit. The trim measures 5 inches in diameter and the body stands 2.71 inches tall, so you need at least that much depth above the ceiling inside the housing. The 5 inch trim overlaps a nominal 4 inch opening, which is what hides the cut edge of the existing can.
2) Can this Starfish downlight be used in a shower or a covered exterior soffit?
The S11568 carries a wet location rating, so a shower trim or similar damp/wet interior spot is within its rating. Satco still lists it as an indoor product, so keep it inside the building envelope rather than on an open exterior soffit. It is cETLus listed.
3) What color range do I actually get with this RGB and tunable white downlight?
White tuning runs 2000K to 5000K, from very warm candle-like light up through daylight, plus full RGB color. CCT is selectable, so one part number covers the warm residential look and the cooler commercial look without stocking two SKUs. Wattage is fixed at 10.5W, not selectable.
4) Will this Satco retrofit satisfy California Title 24 on a lighting job?
No. Satco lists the S11568 as not Title 24 compliant, so it should not be specified where Title 24 certification is required for the luminaire. For California new construction or permitted alteration work, choose a JA8-listed downlight instead. It is cETLus listed and RoHS compliant.
5) Does the Satco Starfish downlight need a hub or gateway to control it?
No separate hub or bridge is required. Starfish IOT is built into the fixture, so control happens over the Starfish app directly. The unit is FCC compliant for its wireless radio and runs on 120V, 60Hz line power.
6) Do I need to keep the existing wall dimmer with this smart retrofit downlight?
The S11568 is dimmable, and because dimming and color are handled through Starfish, you can leave a standard switch in place and dim from the app. If you want wall control, the fixture's own dimming capability supports it. Either way the fixture is the control point, not the driver in the ceiling.
7) Can I standardize a whole building on this one downlight if I only want plain white light?
You can, and that is a common use of the S11568 in multi-family and hospitality: one part number covers 2000K through 5000K plus color, so every opening is the same SKU and the scene is set per unit or per area in Starfish. Only one finish is offered, white, and the color temperature is set after install rather than at the time of order.
8) Is there a separate bulb to buy or replace with this downlight?
No lamp to buy. The LED is integrated into the fixture, so the whole retrofit is replaced at end of life rather than relamped. There is no socket or base to match, which is why it drops into an existing can and connects to the housing's line wiring.
9) What is the trim made of, and how heavy is it for an old ceiling?
Aluminum body and trim, and the unit weighs 0.35 lb. At that weight it hangs off an existing can with no added support needed, and the aluminum helps shed heat in a closed housing.
How fast can I get the Satco Lighting S11568 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11568 come with a warranty?
Absolutely. The Satco Lighting S11568 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11568?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11568 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.