SATCO Lighting S39011 7W LED Direct Wire Downlight, 4 inch: 2700K, 120V, Dimmable
7 watt LED Direct Wire Downlight - 4 inch: 2700K - 120 volt - Dimmable
Manufacturer Resources
Product Specs
- Avg Rated Hours:
- 40000
- CCT Selectable:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Connector or Adapter
- Lamp Shape:
- Integrated LED
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Direct Wire LED Downlight
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Thermal Conductive Plastics & Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cETLus - Listed
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S39011/S39011_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S39011.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 2700K
- Product Diameter:
- 5.69"
- Product Dimension:
- H:2.75" DIA:5.69"
- Mounting Method:
- Ceiling
- Product Shape:
- Round
- Product Style:
- Utility
- Product Height:
- 2.75"
- Product Category:
- Fixtures
- Product Wattage:
- 7W
- Product Weight:
- 0.37 lb
- Product Material:
- Thermal Conductive Plastics & Aluminum
- Product Width:
- 5.69 in
Satco Lighting S39011 – Frequently Asked Questions
1) Will the Satco S39011 4 inch downlight fit my existing 4 inch recessed can?
The S39011 is built for a 4 inch recessed opening and measures 5.69 inches in diameter with a 2.75 inch housing height, so the trim flange covers the can edge and the body needs 2.75 inches of clear depth above the ceiling. It mounts to the ceiling and is a direct wire unit, so there is no screw base going into a lamp socket.
2) Can the Satco S39011 downlight go in a shower or over a tub?
It carries a wet location rating, which covers shower and tub enclosures as well as covered exterior soffits from a moisture standpoint. Note that Satco classifies the fixture itself as an indoor product, so the intended use is wet indoor spaces like bathrooms rather than open exposure.
3) Does this Satco 4 inch LED downlight dim, and can I change the color temperature?
It dims on 120V, but the color is fixed at 2700K warm white and the wattage is fixed at 7W. There is no CCT selector switch and no wattage selector, so if you need a job where crews set 3000K or 4000K in the field, this is the wrong model. Pair it with a dimmer rated for LED loads.
4) Will the S39011 satisfy California Title 24 on a residential retrofit?
Satco lists the S39011 as Title 24 compliant, which is what inspectors look for on recessed luminaires in California residential work. It is also cETLus Listed for US and Canada, FCC compliant, and RoHS compliant.
5) Is 450 lumens at 7 watts enough for a hallway or closet, or do I need something brighter?
The S39011 puts out 450 lumens from 7 watts, which is roughly a 40 watt incandescent equivalent. That suits closets, small hallways, and accent spacing in a tight grid. For general ambient light in a kitchen or bath, plan on more fixtures or step up to a higher lumen 4 inch downlight, because one of these will not carry a room on its own.
6) For a multi-family property, how long before these Satco downlights need replacing?
Rated life is 40,000 hours. At roughly 4 hours a day in a corridor or unit common area that is over 25 years of service; run 12 hours a day in a stairwell and you are closer to 9 years. The LED is integrated, so at end of life the whole fixture gets swapped rather than a lamp.
7) Will heat be a problem putting these in insulated ceilings?
The S39011 body uses thermal conductive plastics and aluminum to pull heat off the LED. It is a 7 watt load, so heat rejection is modest, but IC compatibility depends on the housing you are installing into, not the trim. Follow the Satco installation instructions supplied with the fixture for the housing conditions it allows.
8) What finish does the Satco S39011 downlight come in for matching existing trims?
One finish only: white trim with a frosted lens. Round shape, utility styling, so it blends with standard white 4 inch recessed trim already in a building rather than reading as a decorative fixture.
How fast can I get the Satco Lighting S39011 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S39011 come with a warranty?
Absolutely. The Satco Lighting S39011 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S39011?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S39011 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.