SATCO Lighting S39013 7W LED Direct Wire Downlight, 4in, 4000K, 120V, Dimmable
7 watt LED Direct Wire Downlight - 4 inch - 4000K - 120 volt - Dimmable
Manufacturer Resources
Product Specs
- Avg Rated Hours:
- 40000
- CCT Selectable:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Connector or Adapter
- Lamp Shape:
- Integrated LED
- Lumens:
- 490L
- Operating Frequency:
- 60Hz
- Product Type:
- Direct Wire LED Downlight
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Thermal Conductive Plastics & Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cETLus - Listed
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S39013/S39013_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S39013.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 4000K
- Product Diameter:
- 5.69"
- Product Dimension:
- H:2.75" DIA:5.69"
- Mounting Method:
- Ceiling
- Product Shape:
- Round
- Product Style:
- Utility
- Product Height:
- 2.75"
- Product Category:
- Fixtures
- Product Wattage:
- 7W
- Product Weight:
- 0.37 lb
- Product Width:
- 5.69 in
- Product Material:
- Thermal Conductive Plastics & Aluminum
Satco Lighting S39013 – Frequently Asked Questions
1) How much ceiling cavity depth do I need above a 4 inch Satco S39013 downlight?
Allow at least 2.75 inches of clear depth, which is the overall height of the fixture including the integrated driver box. That is the number to check against shallow plenums, joist bays with ductwork, or a furred-down ceiling.
2) Can I use this Satco 7W downlight in a shower or a covered exterior soffit?
It carries a wet location rating, so a shower or tub enclosure is acceptable. It is classified for indoor use, however, so do not put it in an exposed exterior soffit or open canopy. Listing is cETLus.
3) Is the light color on the Satco S39013 adjustable, or fixed?
Fixed at 4000K, a neutral white. There is no CCT selector switch and no wattage selector, so every unit ordered is 7W at 4000K. If you are mixing these into a building where the other downlights are 3000K, the difference in color will be visible; order all openings on the same run in one color temperature.
4) Does this Satco direct wire downlight work on a dimmer, and what voltage?
It is dimmable and runs on 120V, 60Hz only. Do not put it on a 277V circuit. With a 7 watt load per fixture, watch the minimum load rating on whatever dimmer you use; a single fixture on a legacy dimmer sized for incandescent loads may flicker or fail to start.
5) Can the LED be replaced in this Satco downlight when it burns out, or is the whole fixture thrown away?
It is an integrated LED module, so there is no replaceable lamp; the fixture is rated for 40,000 average hours and gets swapped as a unit at end of life. For a maintenance crew standardizing on part numbers, that means stocking the fixture S39013 rather than lamps.
6) What is the trim on the Satco 4 inch direct wire downlight made of, and what does it look like?
Round utility-style trim in white with a frosted lens. Body construction is thermal conductive plastic and aluminum, which is how the driver heat is shed in a shallow 2.75 inch housing. It is a plain flat-look trim, not a decorative baffle or gimbal, so it reads best in corridors, back-of-house, and rental turnovers.
7) Where do I get the wiring instructions and photometric data for Satco S39013?
Satco publishes both an installation instruction sheet and a full spec sheet for the S39013. The instruction PDF is at assets.satco.com under products/S39013 and the spec sheet at media.satco.com/specsheets/pdf/S39013.pdf. Pull the spec sheet if you need the data for a submittal package.
How fast can I get the Satco Lighting S39013 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S39013 come with a warranty?
Absolutely. The Satco Lighting S39013 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S39013?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S39013 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.