SATCO Lighting S39012 7W LED Direct Wire Downlight, 4in, 3000K, 120V, Dimmable
7 watt LED Direct Wire Downlight - 4 inch - 3000K - 120 volt - Dimmable
Manufacturer Resources
Product Specs
- Avg Rated Hours:
- 40000
- CCT Selectable:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Connector or Adapter
- Lamp Shape:
- Integrated LED
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Direct Wire LED Downlight
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Thermal Conductive Plastics & Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cETLus - Listed
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S39012/S39012_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S39012.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 3000K
- Product Diameter:
- 5.69"
- Product Dimension:
- H:2.75" DIA:5.69"
- Mounting Method:
- Ceiling
- Product Shape:
- Round
- Product Style:
- Utility
- Product Height:
- 2.75"
- Product Category:
- Fixtures
- Product Wattage:
- 7W
- Product Material:
- Thermal Conductive Plastics & Aluminum
- Product Weight:
- 0.37 lb
- Product Width:
- 5.69 in
Satco Lighting S39012 – Frequently Asked Questions
1) Will the Satco S39012 downlight fit a 4 inch recessed can?
It's built for 4 inch recessed openings. The trim ring measures 5.69 inches in diameter and the housing depth behind it is 2.75 inches, so you need at least 2-3/4 inches of clear plenum above the ceiling and the 5.69 inch flange will cover a nominal 4 inch cut opening.
2) Can I use this LED downlight in a shower or over a bathtub?
Yes. The S39012 carries a Wet location rating and is cETLus Listed, so it's acceptable in a shower or tub enclosure ceiling where wet-rated fixtures are required. Satco still classes it as an indoor fixture, so keep it inside the building envelope rather than on an exposed soffit.
3) Does the S39012 meet California Title 24 for residential recessed lighting?
Yes, Satco lists it as Title 24 compliant, which is the item that matters on California jobs where recessed fixtures have to be JA8-type compliant. It is also RoHS compliant and FCC compliant, and the LED is integrated rather than a replaceable lamp.
4) Will the color temperature match downlights I already have, and can I change it?
Fixed at 3000K warm white. This one is not CCT selectable and not wattage selectable, so there's no field switch, what you order is what you get. If the rest of your building is running 2700K or 4000K, this will read noticeably different in the same ceiling, so spec by room rather than mixing on one run.
5) Does this Satco downlight dim on a standard wall dimmer?
It is a dimmable 120V, 60Hz fixture. Use an LED-compatible forward or reverse phase dimmer, not an old incandescent-only rheostat, and keep the load within the dimmer's stated LED minimum, which matters because each fixture only draws 7 watts and a bank of them can fall below a dimmer's low-end threshold.
6) Can the LED be replaced when it burns out, or does the whole fixture get swapped?
The LED is integrated, so there's no lamp to change, the fixture is replaced as a unit. Rated life is 40,000 hours, which at 6 hours a day is on the order of 18 years of service, so for MRO planning it's a fixture-level replacement item, not a relamping item.
7) What does the trim look like, and how does it hold up in a rental unit?
Round white trim with a frosted lens, a plain utility look that blends into a flat white ceiling. The body is thermal conductive plastic and aluminum, so heat is pulled off the LED through the housing, which is what keeps the driver alive in a tight insulated ceiling cavity.
How fast can I get the Satco Lighting S39012 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S39012 come with a warranty?
Absolutely. The Satco Lighting S39012 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S39012?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S39012 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.