ABH 0147 Heavy-Duty Offset Piv...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$543.00
$533.60
ABH ABH 0147 Pivot Set, 3/4" Offset, Up to 600 lbs ABH-0147

ABH 0147 Heavy-Duty Offset Pivot Set with 3/4" Offset for Doors Up to 600 lbs

(No reviews yet) Write a Review

Model: 0147-RH-US26
$543.00
$533.60
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$543.00
$533.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ABH Heavy-Duty Offset Pivot Set with 3/4" Offset for Doors Up to 600 lbs

Professional Heavy-Duty Pivot Hardware for Commercial Applications

The ABH Heavy-Duty Offset Pivot Set delivers professional-grade door support with 3/4" offset design for doors up to 600 pounds and maximum door width of 48". Constructed from stainless steel base material with heavy-duty bearings, this pivot set is UL listed for use on 3-hour fire rated doors. The handed design requires specification of LH or RH configuration for proper installation.

Professional Features & Benefits

  • Heavy-Duty Load Capacity: Supports doors up to 600 pounds with maximum door width of 48" for demanding commercial applications.
  • Precision Offset Design: 3/4" offset configuration provides proper door clearance and smooth operation for offset hung installations.
  • Stainless Steel Construction: Stainless steel base material with heavy-duty bearings ensures long-lasting durability and corrosion resistance.
  • Fire Rating Compliance: UL listed for use on 3-hour fire rated doors meeting critical safety requirements for commercial buildings.
  • Intermediate Pivot Compatibility: Doors ranging from 60" to 90" tall should use one intermediate pivot (019 recommended, order separately), with additional pivots for each 30" in door height.
  • Handed Configuration: Available in left-hand (LH) or right-hand (RH) configurations to match specific door swing requirements.
  • Professional Installation Support: Includes manufacturer templates and cut sheets for accurate installation and proper door preparation.

Technical Specifications

  • Application: Standard Door
  • BAA Qualified: Yes
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Door Weight: Up to 600 lbs
  • Duty Level: Heavy Duty
  • Electronic: No
  • Fire Rated Time: 3 hours
  • Fire Rating: Yes
  • Hang Type: Offset Hung
  • Mounting Method: Offset
  • Pivot Type: Top & Bottom
  • Product Category: Door Hinges and Pivots
  • Product Group: Door Hinges and Pivots
  • Product Subgroup: Pivots and Pivot Sets
  • Product Substrate: Stainless Steel
  • Product Type: Pivot Sets - Offset
  • Subcategory: Door Pivots

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Government and Municipal Buildings
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Fire-Rated Door Applications

Why Choose ABH Quality?

ABH pivot sets deliver professional-grade reliability with stainless steel construction and heavy-duty bearings rated for doors up to 600 pounds. UL listed for 3-hour fire rated applications with BAA qualification for government projects. Engineered for demanding commercial applications where dependable performance and fire safety compliance are essential.

Product Specs

Product Group:
Door Hinges and Pivots
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Pivot Sets - Offset
Subcategory:
Door Pivots
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
BAA Qualified:
Yes
Duty Level:
Heavy Duty
Fire Rated Time:
3 hours
Electronic:
No
Door Weight:
Up to 600 lbs
Pivot Type:
Top & Bottom
Mounting Method:
Offset
Application:
Standard Door
Fire Rating:
Yes
Product Category:
Door Hinges and Pivots
Product Substrate:
Stainless Steel
Department:
Door Hardware

ABH 0147-RH-US26 – Frequently Asked Questions

1) How much door weight will the ABH 0147 offset pivot set carry?
The 0147 pivot set is rated for doors up to 600 lbs with a maximum door width of 48 inches. That covers most heavy commercial entrances, wide stile aluminum doors, and hollow metal doors in high-traffic openings. If your door exceeds 48 inches wide or 600 lbs, this is not the right set.
2) Can I use ABH 0147 pivots on a 3-hour fire rated door?
Yes. The 0147 set is UL listed for use on 3-hour fire rated doors, so it can be used on stair enclosures, shafts, and other openings where a 3-hour assembly is required. Fire rated openings still need the whole assembly listed, but the pivots themselves are not the limiting piece.
3) Is the ABH 0147 pivot set handed, and how do I know if I need left hand or right hand?
Handing matters here. The 0147 is a handed set and is ordered as either Left Hand or Right Hand, so the pivot has to match the swing of the door it is going on. Get it wrong and the pivot will not take the door. Determine handing before you order, not after the leaf is on site.
4) Do I need an intermediate pivot with the ABH 0147, and how many?
For doors 60 to 90 inches tall, plan on one intermediate pivot along with the top and bottom set, with an additional intermediate pivot for each 30 inches of door height beyond that. ABH recommends the 019 intermediate, and it is ordered separately, so it is not in the box with the 0147. Budget for it on tall doors when you quote the opening.
5) What exactly comes in an ABH 0147 pivot set, and can I buy just the top or bottom pivot?
The full 0147 set includes the 0180 top pivot and the 0117B bottom pivot. You can also order pieces on their own: the 0147B bottom pivot only, or the 0180 top pivot only. That is the route to take when you are replacing a single failed pivot rather than rehanging the whole door, and it keeps the finish matched to the rest of the opening.
6) What is an equivalent 3/4 inch offset pivot set if the ABH 0147 does not suit the opening?
The Calibre Door Closers PV1000 is also a 3/4 inch offset flush pivot set, so it addresses the same offset hung geometry as the ABH 0147, which uses a 3/4 inch offset and a top and bottom pivot arrangement. The 0147 set is stainless steel and rated for doors up to 600 lbs, and it is ordered handed left hand or right hand. Confirm handing and door weight against the opening before swapping either way.
7) Which offset pivot set works on a 3 hour fire rated opening?
The ABH 0147 pivot set is fire rated with a 3 hour fire rated time, and the BEST A3 system offset hung pivot set is also fire rated. If the door schedule calls out a specific rated duration, match it to the 0147, which states the 3 hour figure directly.
8) What is a 3/4 inch offset pivot and when should I use one instead of hinges?
An offset pivot hangs the door on a pin set 3/4 inch out from the face of the frame rather than on butt hinges in the jamb, so the door swings clear of the frame instead of pivoting at the edge. The 0147 is an offset hung, top and bottom pivot set at 3/4 inch offset. Pivots are the choice where door weight, traffic, or a door too heavy for jamb-mounted butts is the issue, since the load goes into the floor and header rather than the jamb. If the opening is already prepped for butt hinges and the door is light, hinges stay simpler; converting to pivots means new floor and header prep.
9) Are ABH 0147 pivots approved for federal and government jobs?
The 0147 pivot set is BAA qualified, so it clears Buy American Act sourcing requirements on government and municipal work. That matters on federal, GSA, and publicly funded institutional projects where the submittal has to show domestic qualification.
10) Will ABH 0147 pivots hold up in an exterior or wet environment?
The 0147 is built on a stainless steel base material with heavy-duty bearings, which is what gives it corrosion resistance for exterior entrances, garage and loading areas, and washdown-adjacent openings. Finish is a separate choice from the base metal, and the bare stainless options are Bright Stainless Steel and Satin Stainless Steel.
11) Is the ABH 0147 an electrified pivot for power transfer?
No power transfer here. The 0147 is a mechanical, non-electronic pivot set. If your opening needs power to an electrified lock or exit device at the door, you will need a separate electric power transfer device or an electrified hinge or raceway; the 0147 will not carry conductors.
12) Is the BEST A3 pivot set a drop-in replacement for the ABH 0147?
Both are offset hung pivot sets, so they serve the same hanging method, but they are not the same part. The ABH 0147 is a top and bottom set at a 3/4 inch offset in stainless steel, ordered by handing, and rated to 600 lbs. The BEST A3 is a different manufacturer's system, so door prep, floor plate footprint, and load capacity all have to be confirmed against the existing mortise before treating it as a swap.
13) What should be ordered instead when only the bottom pivot needs replacing?
The ABH 0147 is sold as a complete set that includes the 0180 top and 0117B bottom, but the 0147B bottom pivot and the 0180 top pivot are also available individually. For a single failed pivot on an existing offset hung door, the individual piece is the direct replacement rather than a full peer set such as the Calibre Door Closers PV1000. Handing still has to be stated left hand or right hand.
14) What finishes can I get the ABH 0147 pivot set in to match the rest of my door hardware?
Fourteen finishes are offered on the 0147: Black Suede Powder Coat, Bright Brass, Bright Bronze, Bright Chrome, Bright Stainless Steel, Oil Rubbed Bronze, Painted Aluminum, Painted Brass, Painted Dark Bronze, Painted Satin Bronze, Satin Brass, Satin Bronze, Satin Stainless Steel, and White Suede Powder Coat. For a property manager standardizing a building, the painted and powder coat options are the ones that match aluminum storefront and painted hollow metal frames; the brass and bronze finishes match existing lever and closer hardware.
15) Is the ABH 0147 pivot set suitable for a residential door?
It is built for commercial standard doors, not residential work. The 0147 is a heavy duty commercial pivot set rated to 600 lbs, which is far more than a house door needs and requires floor and header prep a residential opening usually does not have. For an apartment or interior residential leaf, standard butt hinges are the simpler answer; use this on the building's heavy entrance and stair doors.
How fast can I get the ABH 0147-RH-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABH 0147-RH-US26 come with a warranty?
Absolutely. The ABH 0147-RH-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABH 0147-RH-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABH 0147-RH-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!