Adams Rite 8200 Series 36" Nar...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,130.00
$641.60
Adams Rite 8200 Series 36" Narrow Stile Surface Vertical Rod Exit Device

Adams Rite 8200 Series 36" Narrow Stile Surface Vertical Rod Exit Device

(No reviews yet) Write a Review

Model: 8211-36
$1,130.00
$641.60
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,130.00
$641.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Adams Rite 8200 Series 36" Narrow Stile Surface Vertical Rod Exit Device

Life-Safety Exit Device for Narrow Stile Aluminum Applications

The Adams Rite 8200 Series 36" Narrow Stile Surface Vertical Rod Exit Device delivers professional-grade life-safety performance for narrow stile aluminum door applications requiring two-point locking. Designed for 36" [914.4 mm] openings with minimum 2" stile width, this Grade 1 exit device accommodates door thicknesses from 1-3/4" [44.5 mm] to 2-1/4" [57.2 mm]. The extruded aluminum push bar adjusts from 30" [762 mm] to 44" [1117.6 mm] height and features a projection of 2-15/16" [74.6 mm] when fully projected.

Professional Features & Benefits

  • ANSI/BHMA Grade 1 certified
  • Narrow stile aluminum door construction
  • Rim (8300/8400) and top-of-door mounted (8800/8700/EX88) configurations
  • Stainless steel touchbar / crossbar
  • UL 10C fire door listed
  • Panic-proof single-motion egress
  • Available with electric latch retraction
  • Compatible with 7800 electric strike
  • Multiple trim options and levers
  • Field-reversible handing

Technical Specifications

  • Door Application: Narrow stile aluminum doors
  • Configuration: Rim, mortise, top-of-door mounted
  • Egress: Single-motion panic proof
  • Compatible Strike: 7800 Series electric strike
  • Fire Rating: UL 10C listed
  • ANSI/BHMA: Grade 1
  • Handing: Field reversible

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness from 1-3/4" to 2-1/4", minimum 2" stile width, and door height up to 8' with standard configuration.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and frame surfaces for the 36" opening configuration.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions for surface vertical rod mounting.
  4. Install all mounting hardware including header strike and secure the device to door and frame per manufacturer torque specifications using standard machine screws.
  5. Adjust push bar height between 30" and 44" for proper positioning and configure dogging mechanism with hex key or optional cylinder dogging as required.
  6. Test device operation including top rotating bolt latching mechanism and bottom hexagonal hardened steel bolt to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Adams Rite Quality?

Adams Rite 8200 Series exit devices deliver professional-grade reliability with extruded aluminum construction and patented top latching mechanism rated for Grade 1 performance. The 5-year manufacturer warranty provides comprehensive coverage for demanding commercial applications. Engineered for life-safety applications where dependable two-point locking performance is essential for narrow stile aluminum door systems.

Product Specs

Product Group:
Exit Devices and Trim
Series:
8200 Series
Grade:
Grade 1
Stile Width:
3-3/4"
Warranty:
5 Year
Product Subgroup:
Exit Devices - Vertical Rod
Subcategory:
Surface Vertical Rod
Fasteners:
Machine Screws
Commercial/Residential:
Commercial
Stile Type:
Narrow Stile
Product Model:
82 Life- Safety
Product Length:
36"
Fire Rating:
No
Product Substrate:
Aluminum
Product Category:
Exit Devices and Trim
Department:
Door Hardware
Product Type:
Exit Devices - Surface Vertical Rod

Adams Rite 8211-36 – Frequently Asked Questions

1) Will the Adams Rite 8200 exit device work on a 2 inch thick aluminum door, or is it 1-3/4 inch only?
Door thickness on the 8200 Series runs 1-3/4 inches (44.5 mm) up to 2-1/4 inches (57.2 mm), so a 2 inch door is inside the range. That range is wider than most surface vertical rod devices in the same class: the Corbin Russwin ED4400 narrow stile, the Falcon 19-V-EO narrow stile and the Von Duprin 3327A are each listed at 1-3/4 inches only. If your storefront leaves measure thicker than standard, the 8200 is the one that covers it.
2) Will an Adams Rite 8200 vertical rod device fit a narrow stile aluminum storefront door?
That is the opening it is built for. The 8200 Series is a narrow stile device for aluminum doors, and it needs a minimum 2 inch stile on a 36 inch opening. A wide stile device will not mount on that same door: the Corbin Russwin ED5400, the Falcon 25-V-EO and the Von Duprin 2227 are all wide stile and are meant for hollow metal or wood leaves with a broad lock stile. Check the stile face on your door before you order either way.
3) How does a surface vertical rod exit device latch a pair of storefront doors with no center mullion?
It latches into the head and the floor instead of into a jamb or a mullion, which is why it suits a pair. On the Adams Rite 8200, a top rotating bolt engages the header strike and a hexagonal hardened steel bottom bolt engages at the sill, giving two-point locking on each leaf. Pushing the bar once retracts both bolts, so egress is a single motion. A rim device would need a mullion between the leaves to have something to latch into; the vertical rod arrangement is what lets you leave that opening clear.
4) Can an Adams Rite 8200 exit device be tied into a card access system for remote unlock?
Yes, and there are two electrified paths to pick from at order time. LR is electric latch retraction driven by a solenoid; MLR is motorized latch retraction. An alarm version is also offered if you want local annunciation rather than remote release. On top of that you can add a monitoring switch, single or dual, to report device status back to the panel. Choose None on both axes if the door is mechanical only. Electrified latch retraction needs a power supply run to the door, which is a separate item from the device.
5) The opening is a wood door - can I use the Adams Rite 8200 or do I need a different surface vertical rod device?
The Adams Rite 8200 Series is an aluminum narrow stile device intended for narrow stile aluminum doors. For a wood door, the TownSteel 8900 Series ED3727 is the closest match in form: Grade 1, narrow stile, 36 by 84 inches, and listed wood door compatible. If the wood door has a wide stile, the TownSteel ED8927 is Grade 1 wide stile at 36 by 84 inches and also wood door compatible, and the TownSteel EF9727 adds a fire rating in a heavy duty wide stile device. Two narrow stile devices to rule out on wood are the Von Duprin 7527-3ft and the Von Duprin 7827-3ft, both listed not wood door compatible.
6) What is the closest equivalent from another manufacturer to the Adams Rite 8200 Series 36 inch narrow stile surface vertical rod exit device?
The Adams Rite 8200 Series is a Grade 1 surface vertical rod device for narrow stile aluminum doors in a 36 inch length. The nearest cross-brand matches are the Corbin Russwin ED4400, a Grade 1 narrow stile surface vertical rod device for 36 inch doors that is exit only and accepts trim; the Falcon 19-V-EO, a Grade 1 narrow stile vertical rod device at 36 inches, exit only; and the Von Duprin 3327A-3ft, a Grade 1 narrow stile surface vertical rod device with a grooved case for 36 inch doors. The Von Duprin 7527-3ft covers the same 3 foot narrow stile application in the 75 Series, and the TownSteel ED3727 is a Grade 1 narrow stile device sized 36 by 84 inches. All of those peers list a 1-3/4 inch door thickness, while the 8200 spans 1-3/4 inch to 2-1/4 inch doors.
7) My aluminum doors measure 2 inches thick - which surface vertical rod exit devices will fit that thickness?
The Adams Rite 8200 Series 36 inch device accepts door thicknesses from 1-3/4 inch to 2-1/4 inch, so a 2 inch door sits inside its range. The comparable surface vertical rod devices that publish a thickness are all built around 1-3/4 inch doors: Corbin Russwin ED4400 and ED7400, Falcon 19-V-EO, 24-V-EO, 20 Series and 25-V-EO, Von Duprin 3327A, 7527 and 2227, and Orca Hardware OED56. Measure the actual stile before ordering, since a 2 inch door narrows the field to the 8200.
8) Do I have to order the Adams Rite 8200 left hand or right hand?
Handing is not an order decision on the 8200 Series. The device is field reversible, so one part covers a left hand or right hand leaf and the installer sets it on site. For a property with mixed swings, that means a single item to stock rather than two. Among the alternatives, the BEST Precision 5201 and the Von Duprin 2227 are also reversible or non-handed.
9) Can I dog the push bar down on an Adams Rite 8200 during business hours?
Yes. Dogging is set with a hex key as standard, and cylinder dogging is a required yes/no selection when you order. Pick Yes for cylinder dogging if you want staff to hold the latches retracted with a key instead of carrying an allen wrench, which is the usual choice on a retail or office entrance that stays unlocked through the day. Pick No and you keep hex key dogging.
10) What is the less bottom rod option on the Adams Rite 8200 for?
Less bottom rod deletes the lower rod and the bottom bolt, so the device latches at the header only. Contractors specify it where the floor prep is a problem: carpet or tile that has raised the finished floor, an uneven slab, or a threshold you do not want to cut a strike into. It also removes a rod at shin height that gets kicked and knocked out of adjustment. It is a required yes/no choice on the order. If you want a device that comes that way as standard, the Orca Hardware OED56 36 inch is listed less bottom rod, non-handed.
11) Will the Adams Rite 8200 work with an electric strike for card access on a storefront entrance?
It is compatible with the Adams Rite 7800 Series electric strike, and the 8200 is offered in rim (8300/8400) and top-of-door mounted (8800/8700/EX88) configurations to suit how the opening is latched. That gives you a second route to controlled access besides electrifying the device itself: strike release at the frame rather than latch retraction at the bar. On a pair of doors with no mullion the latch retraction option is usually the one that works, since there is no frame member to hold a strike.
12) Is the Adams Rite 8200 Grade 1, and what else could I standardize a building on?
The 8200 Series carries an ANSI/BHMA Grade 1 rating, the top commercial durability grade. If you are writing a standard across a portfolio and want other narrow stile Grade 1 surface vertical rod options, the Corbin Russwin ED4400 accepts trim, the Corbin Russwin ED7400 is a crossbar device that accepts operator trim, and the Falcon 19-V-EO, Von Duprin 3327A and Von Duprin 7527 are exit only or narrow stile Grade 1 as well. Keeping one series across a site simplifies trim, keying and spare parts more than mixing brands by opening.
13) I need a fire rated surface vertical rod exit device - which ones do you carry?
For a fire rated opening, look at the Arrow S1150 30 inch fire rated surface vertical rod device, which is exit only and less trim and is listed for narrow or wide stile, or the TownSteel 9700 Series EF9727, a 36 x 84 heavy duty ANSI Grade 1 fire rated device for wide stile and wood doors. The Sargent 2727 is a reversible Grade 1 fire rated wide stile device. Fire rated openings also need the rest of the assembly to match, so the closer, hinges and frame have to be right along with the device.
14) What else do I need to order with an Adams Rite 8200 to finish the job?
The device mounts with machine screws and installs with its mounting hardware including the header strike, so the latching side of the opening is covered. Two things are decided separately. Outside trim: the 8200 takes multiple trim and lever options, and if you want the door to be openable from the outside you specify that trim with the order rather than assuming it comes along. Power: the LR and MLR electrified versions need a supply run to the door. Templates for marking the door and frame come from the manufacturer's instructions, so the installer is not measuring the prep by hand.
15) I need a vertical rod device without a bottom rod so the door bottom stays clear - what are my options?
The Adams Rite 8200 Series 36 inch device can be ordered less bottom rod, which leaves the top rod and header strike doing the latching. The Orca Hardware OED56 Series is the cross-brand option built the same way: a 36 inch standard duty surface vertical rod device supplied less bottom rod, non-handed, exit only, in an aluminum finish, for 1-3/4 inch doors. Less bottom rod construction is normally paired with an auxiliary bottom latch or a floor condition that will not accept a strike, so confirm the opening detail before choosing between them.
16) Is the Sargent 12-8710 an alternative to a Grade 1 surface vertical rod exit device?
Not for a working opening. The Sargent 12-8710 lists its product function as dummy - it is an 8700 Series wide stile piece that matches the look of a surface vertical rod device without providing latching or panic egress, normally used on the inactive leaf of a pair so both leaves read the same. For a wide stile leaf that has to latch and release, the Sargent 2727 and Sargent 3727 are both Grade 1 surface vertical rod devices with an exit only function, the 3727 with a standard push bar.
17) I need outside lever entry on a narrow stile aluminum door - which vertical rod devices accept trim?
The Adams Rite 8200 Series 36 inch device offers multiple trim options and levers alongside its rim and top-of-door configurations. Among narrow stile comparables, the Corbin Russwin ED4400 is exit only and accepts trim, and the Corbin Russwin ED7400 is a Grade 1 narrow stile crossbar device for 36 inch doors that accepts operator trim. The Falcon 19-V-EO and Falcon 24-V-EO are both narrow stile Grade 1 devices with an exit only function, and the Arrow S1150 is supplied device only, less trim, so specify the outside trim separately or choose a device cataloged to accept it.
18) Which surface vertical rod exit devices come in Grade 2 instead of Grade 1?
Two carry a Grade 2 rating: the Dexter ED2000 Series, a Grade 2 surface vertical rod panic device, and the TownSteel TS5100 Series, a Grade 2 heavy duty surface vertical rod device at 36 by 84 inches for wide stile doors. Design Hardware splits its line by duty rather than grade, with the 1000V as the heavy duty 33 inch device and the 2000V as the standard duty 33 inch device. The Adams Rite 8200 Series is Grade 1, as are the Dexter ED1000 and ED1500 Series surface vertical rod devices. Facilities standardizing on a single grade across an aluminum entrance package usually write the whole schedule to one of these two ratings rather than mixing them.
19) How far does the Adams Rite 8200 push bar stick out into the opening, and can the bar height be set?
Projection is 2-15/16 inches (74.6 mm) when the bar is fully projected, which is what you subtract from clear width in a corridor or a vestibule where the door swings against a wall or a second set of doors. The extruded aluminum push bar itself adjusts between 30 inches (762 mm) and 44 inches (1117.6 mm), so bar height can be matched across a run of entrances rather than left wherever the last installer put it.
20) What finishes does the Adams Rite 8200 exit device come in to match existing storefront doors?
Seven finishes are offered: 313 dark bronze anodized, 335 black anodized, 628 clear anodized, 605 bright brass, 606 satin brass, 629 bright stainless steel and 630 satin stainless steel. On aluminum storefront the anodized options are the ones that read as matching the frame, and dark bronze and clear anodized are the two most common existing storefront colors you will be matching to. The touchbar itself is stainless steel.
21) Which surface vertical rod exit devices can go on either hand of door without ordering handed?
The Adams Rite 8200 Series 36 inch device is field reversible, so one part number covers both hands. Comparable devices built the same way are the BEST Precision 5201 Series at 36 inches, cataloged reversible; the Sargent 2727, reversible; the Von Duprin 2227-3ft at 36 inches, non-handed; and the Orca Hardware OED56 Series at 36 inches, non-handed. For a fleet where the hands are mixed across an entrance package, a reversible or non-handed device keeps the stock to one line item.
22) The drawing calls out a crossbar exit device rather than a push bar - what surface vertical rod devices match that?
The Adams Rite 8200 Series uses a stainless steel touchbar / crossbar on an extruded aluminum push bar that adjusts from 30 inch to 44 inch height. If the specification names a crossbar on a narrow stile door, the Corbin Russwin ED7400 is a Grade 1 narrow stile crossbar surface vertical rod device for 36 inch doors that accepts operator trim. On the push bar side, the Sargent 3727 is a Grade 1 wide stile surface vertical rod device with a standard push bar, and the Arrow 3700 Series is a 30 inch Grade 1 exit bar with a wide stile pushpad.
23) My opening is narrower than 36 inches - which surface vertical rod exit devices come in a shorter length?
The Adams Rite 8200 Series is built at 36 inches. For narrower leaves, the Arrow 3700 Series is a 30 inch Grade 1 surface vertical rod exit bar with a wide stile pushpad, exit only, for 1-3/4 inch doors, and the Arrow S1150 is a 30 inch fire rated device, exit only and less trim, listed for narrow or wide stile at 1-3/4 inch. In between, the Design Hardware 1000V and 2000V are both 33 inch surface vertical rod devices, heavy duty and standard duty respectively.
How fast can I get the Adams Rite 8211-36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Adams Rite 8211-36 come with a warranty?
Absolutely. The Adams Rite 8211-36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Adams Rite 8211-36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Adams Rite 8211-36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!