You may also like
AL SERV ENTR SPLICE A:2SLD B:6SLD
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- Yes
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance
- Selling Unit Of Measure:
- each
- Standards:
- RUS Accepted. Complies with ANSI C119.4 when properly installed on Aluminum-to-Aluminum or Aluminum-to-Copper Conductors.
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 2-25/32 inch
- Installation Category:
- None
Blackburn ICS66-1 – Frequently Asked Questions
1) What wire sizes does the Blackburn ICS66-1 service entrance splice take?
The ICS66-1 is a two-conductor splice with a 2 AWG solid run on the A side and a 6 AWG solid run on the B side, which is where the A:2SLD B:6SLD marking comes from. It is a fixed-size compression splice, so both conductors have to match those sizes; a 2 AWG stranded or a 4 AWG conductor calls for a different catalog number.
2) Can I use this Blackburn splice to join aluminum to copper?
Yes. The ICS66-1 complies with ANSI C119.4 when properly installed on aluminum-to-aluminum or aluminum-to-copper conductors, so a dissimilar-metal transition from an aluminum service entrance conductor to copper is within its listed use. It is also RUS Accepted for utility work.
3) Do I need a crimp tool for the ICS66-1, or can it be installed with a wrench?
It is a compression connector, not a mechanical set-screw splice, so it has to be crimped with the die and tool the connector is sized for. If you want a splice you can install with a hex key in a hand hole or a meter socket with no press on site, look for a mechanical set-screw service entrance splice instead.
4) Is the Blackburn ICS66-1 splice insulated, or do I have to tape it?
The ICS66-1 comes insulated, so it does not depend on field-applied tape or heat shrink for its covering. It is intended for service entrance splicing of aluminum conductors.
5) Is the ICS66-1 sold as a single splice or in a bag of multiples?
It is sold each, one connector per unit, under manufacturer part number ICS66-1. Order the quantity of splices the job needs rather than counting on a carton count.
6) Where is the Blackburn ICS66-1 made? I have country-of-origin reporting on this job.
Country of origin is Mexico. That is the figure to put on a submittal or origin declaration for the ICS66-1.
How fast can I get the Blackburn ICS66-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ICS66-1 come with a warranty?
Absolutely. The Blackburn ICS66-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ICS66-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ICS66-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.