You may also like
AL SERV ENTR SPLICE A:4SLD B:6SLD
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- Yes
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance
- Selling Unit Of Measure:
- each
- Standards:
- RUS Accepted. Complies with ANSI C119.4 when properly installed on Aluminum-to-Aluminum or Aluminum-to-Copper Conductors.
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 2-25/32 inch
- Installation Category:
- None
Blackburn ICS63-1 – Frequently Asked Questions
1) What wire sizes does the Blackburn ICS63-1 service entrance splice take?
The ICS63-1 is a two-conductor splice with the A side sized for 4 solid and the B side for 6 solid conductor. It's a dedicated size combination, not an adjustable range, so the run conductor and the tap conductor have to match those sizes. Order it each.
2) Can I use the Blackburn ICS63-1 splice on aluminum to copper?
Yes. The ICS63-1 complies with ANSI C119.4 when properly installed on aluminum-to-aluminum or aluminum-to-copper conductors, so it handles the dissimilar-metal connection at a service entrance as well as an all-aluminum one. It is also RUS accepted.
3) Is the ICS63-1 a crimp splice or a set screw connector?
It's a compression splice. You install it with a crimp tool and the correct die, not a screw driver, so there's no torque to check and no retorque later. Set screw connectors are the alternative when you need a reusable, field-adjustable joint; compression is the choice where a permanent, sealed connection is wanted on a service entrance.
4) Does the ICS63-1 come insulated, or do I have to tape the splice?
It comes insulated, so the splice body itself provides the covering over the connection. You are not building the insulation up with tape after the crimp.
5) How much room do I need in the meter can or pedestal for this splice?
The ICS63-1 body measures 2-25/32 inches, so allow for that length plus bending room for both conductors when you are laying out a tight meter socket, splice box or pedestal.
6) What part number do I order for the Blackburn 4 solid to 6 solid service entrance splice?
Blackburn ICS63-1. That is the manufacturer part number, and it is the insulated aluminum service entrance compression splice with the A side at 4 solid and the B side at 6 solid.
How fast can I get the Blackburn ICS63-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ICS63-1 come with a warranty?
Absolutely. The Blackburn ICS63-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ICS63-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ICS63-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.