You may also like
Anchor 1/4 Yel Plas Wall Ancr kit, 10 x 1-1/4 HWH QD TS USA st-zn
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics WAK1925QD – Frequently Asked Questions
1) What comes in the Metallics WAK1925QD wall anchor kit?
The WAK1925QD is a plastic wall anchor kit: 1/4 inch yellow plastic anchors paired with #10 x 1-1/4 inch hex washer head screws, zinc plated steel, made in USA. You get the anchor and the matching screw together, so there is nothing else to source to hang the item.
2) What size hole do I drill for a 1/4 inch plastic wall anchor?
Match the drill to the anchor body: the WAK1925QD uses 1/4 inch yellow plastic anchors, so a 1/4 inch bit is the hole size. Drill clean and square, tap the anchor flush, then drive the included #10 x 1-1/4 inch hex washer head screw to expand it.
3) Do I order the screws separately from these wall anchors?
No separate screw order needed. WAK1925QD is sold as a kit with the anchors and the matching #10 x 1-1/4 inch hex washer head screws together, and it is the single model offered under that number.
4) Are the Metallics WAK1925QD screws corrosion protected for damp locations?
The screws are zinc plated steel, which handles normal indoor and dry-location service. Zinc plating is not a substitute for stainless in wet, exterior, or corrosive environments, so for those openings specify a stainless fastener instead.
How fast can I get the Metallics WAK1925QD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WAK1925QD come with a warranty?
Absolutely. The Metallics WAK1925QD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WAK1925QD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WAK1925QD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.