You may also like
Anchors 10--12 X 1 Grn Collarless Ancr (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics J1106 – Frequently Asked Questions
1) What does collarless mean on a plastic wall anchor, and when do I want it?
Collarless means the J1106 has no flange or lip at the top, so it seats flush or fully below the wall surface instead of leaving a visible plastic rim. Use it when the item being fastened must sit tight to the wall with no gap, such as a device plate, bracket, or box mounting ear. A collared anchor is the easier choice if you want a stop that keeps it from pushing past the hole.
2) How many anchors come in a jar of Metallics J1106?
100 anchors per jar. Metallics packs the J1106 in a jar rather than a box, which is what MRO and electrical stockrooms generally want on a shelf or in a service truck for repeat small fastening work.
3) Can I use the Metallics J1106 anchor in drywall, or do I need it for masonry?
The J1106 is a 1 inch plastic ribbed anchor for #10-12 screws, the type used in drilled holes in drywall, plaster, block, brick, and concrete where the anchor body expands as the screw drives in. For heavier pull-out loads in hollow drywall, a toggle or self-drilling drywall anchor is the better tool; this style is best for light to moderate loads like straps, brackets, conduit clips, and plates.
4) What hole size do I drill for a #10-12 green anchor?
Drill to the anchor body diameter, not the screw size: the anchor should push in snug with light tap pressure and sit flush, since the J1106 is collarless and has no lip to stop it. Drill full depth for the 1 inch length so the anchor seats completely and the screw engages the ribs along the whole body. Undersizing the hole splits the plastic; oversizing lets it spin.
5) Is there only one size of the Metallics J1106, or do I pick a length?
J1106 is a single configuration: the 1 inch green collarless anchor for #10-12 screws, 100 to a jar. There is no length or color choice under this model number, so ordering J1106 gets you exactly that anchor.
How fast can I get the Metallics J1106 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1106 come with a warranty?
Absolutely. The Metallics J1106 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1106?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1106 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.