You may also like
Anchors 14 X 1-1/2 Blu Collarless Ancr (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics J1111 – Frequently Asked Questions
1) What size screw does the Metallics J1111 blue anchor take?
The J1111 is the #14 x 1-1/2 inch blue plastic anchor, so it is sized for a #14 sheet metal or wood screw at up to 1-1/2 inches of embedment. Match the screw gauge to the anchor gauge; a smaller screw will not expand the anchor against the hole wall.
2) Will a #14 x 1-1/2 blue plastic anchor hold in hollow drywall?
No. The J1111 is a solid-base expansion anchor: it needs masonry, concrete, block, brick, tile, or plaster to grip against. In hollow drywall the body has nothing to compress into and the fastener will pull out. For hollow gypsum, use a toggle or self-drilling drywall anchor instead.
3) What does collarless mean on a plastic anchor, and when do I want it?
Collarless means there is no flange or lip at the top of the anchor, so it drives fully below the surface of the material. That lets a fixture, strap, or box sit flat against the wall with no gap, and it matters when the base of what you are mounting is flush. A collared anchor stops at the surface and leaves a small standoff.
4) How many anchors come in a jar of Metallics J1111?
100 anchors per jar. The jar pack is what electricians stock on the truck for conduit straps, box mounting, and device plates in block, brick, or plaster, where you are setting dozens of the same anchor across a job.
5) How deep does the hole need to be for the Metallics J1111 anchor?
Drill at least the full 1-1/2 inch length of the anchor, and a little deeper so drill dust at the bottom of the hole does not stop the anchor short. The anchor should sit with its top at or just below the surface, since it is collarless and nothing holds it at the face.
6) Is the Metallics J1111 the same thing as a blue conical anchor by part number?
Yes, J1111 is the Metallics manufacturer part number for the collarless blue anchor in #14 x 1-1/2 inch, jar of 100. Order by J1111 to get that exact size and pack; the blue anchors run in several gauge and length combinations and the color alone does not identify the size.
How fast can I get the Metallics J1111 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1111 come with a warranty?
Absolutely. The Metallics J1111 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1111?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1111 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.