Metallics TS48121SSD Anchors 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$169.07
$160.10

Metallics TS48121SSD Anchors 125 1/2 x 8-1/2 Wdg SS (Box 25)

(No reviews yet) Write a Review

Model: TS48121SSD
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$169.07
$160.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 125 1/2 x 8-1/2 Wdg SS (Box 25)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Box
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics TS48121SSD – Frequently Asked Questions

1) Are the TS48121SSD anchors stainless steel or just zinc plated?
Stainless steel, not plated carbon steel. That matters if you're anchoring outdoors, in a wash-down area, on a rooftop, or anywhere the anchor sees moisture or chemicals, where a zinc-plated wedge anchor would rust at the stud and the nut would seize up.
2) Can I use these 1/2 inch wedge anchors in block or brick instead of concrete?
No. Wedge anchors are for solid, cured concrete only. In hollow CMU or brick the expansion clip has nothing solid to bite and will blow out the face shell. For block, use a sleeve anchor or a screw anchor rated for masonry instead.
3) How many anchors come in a box of Metallics TS48121SSD?
25 anchors per box. The pack type is a box, so you're buying a full carton quantity rather than loose pieces, which is the normal way these get ordered for a run of equipment pads, strut racks, or transformer mounts.
4) How does a wedge anchor install, and what do I need besides the anchor?
Wedge anchors are through-set: drill a 1/2 inch hole in cured concrete, clean it, drop the fixture over the hole, drive the anchor through, then torque the nut. The expansion clip wedges against the hole wall as the nut pulls the cone up. The nut and washer come assembled on the stud, so the only extras you need are a 1/2 inch carbide bit, a hammer drill, and a torque wrench or impact.
5) What is the Metallics part number for the 1/2 x 8-1/2 stainless wedge anchor?
Order Metallics TS48121SSD. That's the single manufacturer part number covering the 1/2 x 8-1/2 inch stainless steel wedge anchor sold 25 to a box.
How fast can I get the Metallics TS48121SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS48121SSD come with a warranty?
Absolutely. The Metallics TS48121SSD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS48121SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS48121SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.