Metallics TS5081SSD Anchors 12...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$227.01
$177.14

Metallics TS5081SSD Anchors 125 5/8 x 8-1/2 Wdg SS (Box 25)

(No reviews yet) Write a Review

Model: TS5081SSD
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$227.01
$177.14
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 125 5/8 x 8-1/2 Wdg SS (Box 25)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Box
Product Group:
Anchors
Sub Division:
Electrical-E H2
Department:
Fasteners
Product Subgroup:
Concrete and Masonry Anchors
Product Type:
Wedge Anchor

Metallics TS5081SSD – Frequently Asked Questions

1) Can I use the Metallics TS5081SSD wedge anchor in block or brick instead of concrete?
No. Wedge anchors like the TS5081SSD rely on a clamping wedge expanding against solid base material, so they are for poured concrete only. Hollow block, brick, and mortar joints need a sleeve anchor or a screen-tube/adhesive anchor instead.
2) Is the TS5081SSD stainless steel suitable for outdoor or wet locations?
The TS5081SSD is a stainless steel wedge anchor, which is what you want for exterior slabs, wash-down areas, and other damp or corrosive settings where a plain zinc-plated carbon steel anchor would rust at the collar.
3) What else do I need to install the Metallics 5/8 inch stainless wedge anchors?
A rotary hammer with a 5/8 inch carbide masonry bit, a blow-out bulb or vacuum to clear the hole, a hammer to set the anchor, and a torque wrench with a socket for the nut. The nut and washer come assembled on the anchor; nothing else is supplied in the box of 25.
4) Can wedge anchors be removed or reused once set?
No. Once the TS5081SSD is driven and tightened, the expansion clip is locked against the concrete. You can back the nut off and drive the stud below the surface or cut it flush, but the anchor body stays in the hole and cannot be reused. For fixtures you expect to remove and remount, use a threaded insert or a removable sleeve anchor instead.
5) How many anchors come in a box of Metallics TS5081SSD?
25 anchors per box, supplied as a boxed pack. That is the stainless 5/8 x 8-1/2 inch wedge anchor, so plan material takeoff in multiples of 25.
How fast can I get the Metallics TS5081SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS5081SSD come with a warranty?
Absolutely. The Metallics TS5081SSD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS5081SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS5081SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.