You may also like
Anchors 1/4 X 2-1/4 Wedge Ancr SS (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JTS1214SSD – Frequently Asked Questions
1) Are these Metallics anchors stainless steel or plated?
Stainless steel. That matters for exterior strut, rooftop equipment, wash-down areas, and anywhere a zinc-plated carbon steel anchor would start bleeding rust through the slab or the fixture it's holding.
2) Can I use a 1/4 x 2-1/4 wedge anchor in block or brick, or is it concrete only?
Wedge anchors are designed for solid, poured concrete. In hollow block, the expansion clip has nothing solid to grab in the void and the anchor spins or pulls. For block, brick, or hollow base material, use a sleeve anchor or a screw anchor rated for that substrate instead of this 1/4 x 2-1/4 stainless wedge anchor.
3) How many anchors come in a jar of the Metallics JTS1214SSD?
100 anchors per jar, packed in a jar rather than a box, which is the format most electricians keep on the van for strut, hanger, and panel mounting.
4) What thickness of material will a 2-1/4 inch wedge anchor hold down?
With a 2-1/4 inch overall length, part of that length is buried in the concrete and the rest carries the fixture, nut, and washer. In practice this length suits thin fixtures, strut, conduit clamps, and equipment feet rather than thick base plates. If you are fastening a heavy plate, step up to a longer wedge anchor in the same 1/4 inch diameter.
5) Do these wedge anchors come with nuts and washers?
Yes, a wedge anchor is supplied as a complete assembly: the threaded stud with its expansion clip, plus a nut and washer already on the thread. You tap it through the fixture into the hole and torque the nut to set the clip. No separate hardware to order.
6) Can wedge anchors be removed or reused later?
No. Once a wedge anchor is torqued, the clip is permanently expanded against the hole wall. You can back the nut off and remove the fixture, but the stud stays. If you need to clear it, cut or drive it below the surface and patch. For anything you expect to take apart and remount, a threaded insert or a removable screw anchor is the better call than this stainless wedge anchor.
How fast can I get the Metallics JTS1214SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTS1214SSD come with a warranty?
Absolutely. The Metallics JTS1214SSD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTS1214SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTS1214SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.